Cisco CCNA 640-816 ICND2 Interconnecting Cisco Networking Devices Part 2
Exam Number:640-816 exam ICND2
Associated Certifications: CCNA
Duration: 75 minutes (40-50 questions)
Available Languages: English, Japanese, Chinese, Spanish, Russian, Korean, French, Portuguese 
 
Test4pass 640-816 Exam Description
The 640-816 Interconnecting Cisco Networking Devices Part 2 (ICND2) is the exam associated with the Cisco Certified Network Associate certification. Candidates can prepare for this exam by taking the Interconnecting Cisco Networking Devices Part 2 (ICND2) v1.0 course. This exam tests a candidate's knowledge and skills required to successfully install, operate, and troubleshoot a small to medium size enterprise branch network. The exam covers topics on VLSM and IPv6 addressing; extending switched networks with VLANs; configuring, verifying and troubleshooting VLANs; the VTP, RSTP, OSPF and EIGRP protocols; determining IP routes; managing IP traffic with access lists; NAT and DHCP; establishing point-to- point connections; and establishing Frame Relay connections.

Test4pass Cisco CCNA 640-816 braindumps Demo
1. What is the media access method used by Gigabit Ethernet?
A. CSMA/CA
B. CSMA/CD
C. token passing
D. point-to-point
E. logical link control
Answer: B

2. Refer to the topology and partial router configurations shown in the exhibit. The network is fully operational and all routing tables are converged. Which route will appear in the output of the show ip route command issued on the Branch router?
 
A. S* 0.0.0.0/0 [1/0] via 192.168.10.82
B. R 172.16.11.4/30 [120/1] via 192.168.10.82, 00:00:22, Serial0/0
C. R 192.168.10.80/30 [120/0] via 192.168.10.81, 00:00:22, Serial0/0
D. R 192.168.11.0/24 [120/1] via 192.168.10.81, 00:00:22, Serial0/0
E. C 192.168.12.0/24 is directly connected, FastEthernet0/0
Answer: A

3. Which router command can be used to verify the type of cable connected to interface serial 0/0?
A. show running-config
B. show controllers serial 0/0
C. show interfaces serial 0/0
D. show ip interface serial 0/0
Answer: B

4. What is the default administrative distance of the OSPF routing protocol?
A. 90
B. 100
C. 110
D. 120
E. 130
F. 170
Answer: C

5. A network administrator wants to ensure that only the server can connect to port Fa0/1 on a Catalyst switch. The server is plugged into the switch Fa0/1 port and the network administrator is about to bring the server online. What can the administrator do to ensure that only the MAC address of the server is allowed by switch port Fa0/1? (Choose two.)
A. Configure port Fa0/1 to accept connections only from the static IP address of the server.
B. Employ a proprietary connector type on Fa0/1 that is incompatible with other host connectors.
C. Configure the MAC address of the server as a static entry associated with port Fa0/1.
D. Bind the IP address of the server to its MAC address on the switch to prevent other hosts from spoofing the server IP address.
E. Configure port security on Fa0/1 to reject traffic with a source MAC address other than that of the server.
F. Configure an access list on the switch to deny server traffic from entering any port other than Fa0/1.
Answer: CE

Cisco CCNA 640-816 Exam Topics
CCNA 640-816 Exam Configure, verify and troubleshoot a switch with VLANs and interswitch communications
  Describe enhanced switching technologies (including: VTP, RSTP, VLAN, PVSTP, 802.1q)
  Describe how VLANs create logically separate networks and the need for routing between them
  Configure, verify, and troubleshoot VLANs
  Configure, verify, and troubleshoot trunking on Cisco switches
  Configure, verify, and troubleshoot interVLAN routing
  Configure, verify, and troubleshoot VTP
  Configure, verify, and troubleshoot RSTP operation
  Interpret the output of various show and debug commands to verify the operational status of a Cisco switched network
  Implement basic switch security (including: port security, unassigned ports, trunk access, etc.)
Implement an IP addressing scheme and IP Services to meet network requirements in a medium-size Enterprise branch office network
  Calculate and apply a VLSM IP addressing design to a network
  Determine the appropriate classless addressing scheme using VLSM and summarization to satisfy addressing requirements in a LAN/WAN environment
  Describe the technological requirements for running IPv6 (including: protocols, dual stack, tunneling, etc)
  Describe IPv6 addresses
  Identify and correct common problems associated with IP addressing and host configurations
Configure and troubleshoot basic operation and routing on Cisco devices
  Compare and contrast methods of routing and routing protocols
  Configure, verify and troubleshoot OSPF
  Configure, verify and troubleshoot EIGRP
  Verify configuration and connectivity using ping, traceroute, and telnet or SSH
  Troubleshoot routing implementation issues
  Verify router hardware and software operation using SHOW & DEBUG commands
  Implement basic router security
Implement, verify, and troubleshoot NAT and ACLs in a medium-size Enterprise branch office network.
  Describe the purpose and types of access control lists
  Configure and apply access control lists based on network filtering requirements
  Configure and apply an access control list to limit telnet and SSH access to the router
  Verify and monitor ACL's in a network environment
  Troubleshoot ACL implementation issues
  Explain the basic operation of NAT
  Configure Network Address Translation for given network requirements using CLI
  Troubleshoot NAT implementation issues
Implement and verify WAN links
  Configure and verify Frame Relay on Cisco routers
  Troubleshoot WAN implementation issues
  Describe VPN technology (including: importance, benefits, role, impact, components)
  Configure and vary PPP connection between Cisco routers

Related CCNA exams:640-802  640-816  640-822  640-553