Microsoft 70-500 exam newest braindumps for share

Exam 70-500:
TS: Microsoft Windows Mobile 5.0, Implementing, and Managing
Published: March 02, 2007
Language(s): English, German, Japanese, Spanish, Chinese (Simplified)
Audience(s): IT Professionals
Technology: Windows Mobile
Type: Proctored Exam

70-500 exam overview:

About this Exam
When you pass Exam 70-500: TS: Microsoft Windows Mobile Designing, Implementing, and Managing, you complete the requirements

for the following certification: MCTS : Windows Mobile 5.0, Implementing and Managing.
 
Audience Profile
This exam is intended for IT Professionals 
who design, implement, and manage mobile infrastructures, mobile devices, and

mobile applications in an enterprise or small or medium-sized business environment. The qualified candidate for this exam

typically has:
Experience with or knowledge of Microsoft Exchange Server 2003 or Exchange Server 2007 concepts such as Outlook Web Access

(OWA), Outlook Mobile Access (OMA) , and Exchange ActiveSync (EAS).
One to two years of experience working with Active Directory directory service.
At least one year of experience working with mobile devices.
Experience using or managing Microsoft Windows Mobile 5.0 with the Messaging and Security Feature Pack.
Experience with or knowledge of mobile and general network security concepts such as firewalls, reverse proxy, certificates,

and configuring security protocols (EAP, TLS, WPA, WEP, and 802.1x).
Experience with or knowledge of Microsoft ActiveSync 4.1 or later.
Experience with or knowledge of messaging protocols such as Short Message Service (SMS) and Hotmail (HTTP).

Credit Toward Certification
When you pass Exam 70-500: TS: Microsoft Windows Mobile 5.0, Implementing, and Managing, you complete the requirements for

the following certification(s):
MCTS: Windows Mobile 5.0, Implementing and Managing

Note This preparation guide is subject to change at any time without prior notice and at the sole discretion of Microsoft.

Microsoft exams might include adaptive testing technology and simulation items. Microsoft does not identify the format in

which exams are presented. Please use this preparation guide to prepare for the exam, regardless of its format. 

Microsoft 70-500 exam lastest braindumps and answer

1. You deploy a Microsoft Exchange mobile messaging solution that uses Microsoft Windows Mobile 5.0

with Microsoft Messaging and Security Feature Pack.

The messaging infrastructure is configured to support the remote wipe feature.

When   an  administrator  attempts  to perform  a  remote  wipe  of  a Windows    Mobilebased   device,  the

administrator receives a 401 error message.

You need to ensure that the administrator is authorized to perform remote wipes only.

What should you do?

A. Grant the administrator membership in the Domain Administrators group.

B. Grant the administrator membership in the Exchange Administrators group.

C. Add the new administrator account to the Discretionary Access Control List (DACL) of the Microsoft

Exchange ActiveSync Administration folder.

D. Select the Directory Security tab of the Exchange Server administration Web site, and then configure

Read, Write, and Directory Browsing permissions.

Answer: C

2. You deploy a mobile messaging solution with the Microsoft Exchange Server 2003 server.

The IIS logs on the Exchange Server 2003 server show an excessive number of 401 errors.

You need to reduce the number of 401 errors identified in the logs.

What should you do?

A. Instruct all the users to perform a desktop synchronization at least once every 42 days.

B. Instruct all the users to change the Microsoft ActiveSync configuration password when they change their

domain user account password.

C. Instruct all the users to reset their Microsoft Windows Mobilebased device password when they change

their domain user account password.

D. Enable the This server requires an encrypted SSL connection option in the Microsoft ActiveSync settings

of each Microsoft Windows Mobilebased device.

Answer: B

3. You deploy a mobile messaging solution with Microsoft Exchange Server 2003 Service Pack 2.

All remote users use mobile devices that run Microsoft Windows Mobile 5.0 with Microsoft Messaging and

Security Feature Pack (MSFP).

A remote user reports the loss of a Windows Mobilebased device.

You need to ensure that the information from the Microsoft Exchange ActiveSync (EAS) server is no longer

available on the Windows Mobilebased device.

What should you do?

A. Recreate the Active Directory remote user account.

B. Perform a remote wipe on the Windows Mobilebased device of the remote user.

C. On the Properties tab of the remote user account, disable the user-initiated synchronization option.

D. On the Device Security Settings tab, configure the Wipe device after failed attempts option to a value of

zero.

Answer: B

4.  A Microsoft Exchange  mobile  messaging  solution  uses  Microsoft Windows  Mobile  5.0  with  Microsoft

Messaging and Security Feature Pack. You deploy the solution by using front-end and back-end servers.

Microsoft Exchange Server 2003 Service Pack 2 is installed on the front-end server.

You need to use the remote wipe feature.

What should you do?

A. Install Microsoft Windows Server 2003 Service Pack 2 on all domain controllers.

B. Install Microsoft Exchange Server 2003 Service Pack 2 on the back-end server.

C. Install Microsoft Exchange Server ActiveSync Web Administration Tool on the front-end server.

D. Install Microsoft Exchange Server ActiveSync Web Administration Tool on the back-end server. Reset

Instructions Calculator.

Answer: C

5. You deploy a mobile messaging infrastructure with front-end and back-end Microsoft Exchange Server

2003 servers. Both servers have Service Pack 2 installed.

Company  security  policy  requires  that  all  information  from  the  Exchange  Server  2003  servers  must be

encrypted.

You  need  to  audit  the  mobile  messaging  infrastructure  to  verify  that  it  complies  with  company  security

policy.

What should you do?

A. Review the Internet Information Services (IIS) logs on the front-end Microsoft Exchange Server 2003

server by looking for Microsoft Server ActiveSync log entries and verifying that these entries use the SSL

port for access.

B. Review the Internet Information Services (IIS) logs on the back-end Microsoft Exchange Server 2003

server by looking for Microsoft Server ActiveSync log entries and verifying that these entries use the SSL

port for access.

C. Install Network Monitor on the back-end Microsoft Exchange Server 2003 server. Execute and review a

packet capture session by tracing the packets that originate from the Windows Mobile devices of the users.

D. Install Network Monitor on the front-end Microsoft Exchange Server 2003 server. Execute and review a

packet capture session by tracing the packets that originate from the Windows Mobilebased devices of the

users.

Answer: A

6. You deploy a mobile messaging solution with Microsoft Exchange Server 2003 Service Pack 2.

The  company  security  policy  requires  complex  passwords  on  all  the  Microsoft  Windows  Mobilebased

devices.

You provide a Microsoft Windows Mobile 5.0 smartphonebased device to a new user. The first time the user

uses the device, the user is not prompted for a password.

You need to ensure that the user is prompted for a password.

What should you do?

A. Instruct the user to set a PIN on the mobile device.

B. Instruct the user to perform Microsoft Exchange ActiveSync synchronization Over-The-Air (OTA).

C. On the Device Security Settings tab, select the Require both numbers and letters option.

D. Add the user account of the user to the Exceptions list on the Device Security Settings tab.

Answer: B

7. A user uses both a Microsoft Windows Mobile 5.0 Smartphonebased device and a Microsoft Windows

Mobile 5.0 Pocket PC Phone Edition device for Over-The-Air (OTA) e-mail. Both devices have Microsoft

Messaging and Security Feature Pack installed.

A remote wipe command is issued against the Pocket PC device.

The   user reconfigures   the ActiveSync   settings  on  the  Pocket  PC   device.  When   the  user  attempts

synchronization, the device hard-resets again.

You need to ensure that the user can synchronize the Pocket PC device.

What should you do?

A. Cancel the remote wipe issued against the Pocket PC device.

B. Instruct the user to configure only one device for ActiveSync.

C. Instruct the user to perform a soft-reset of the Pocket PC device.

D. Instruct the user to perform a manual hard-reset of the Pocket PC device.

Answer: A

8. You deploy mobile devices that run Microsoft Windows Mobile 5.0.

A Microsoft Windows  Server  2003  server  that  runs  Routing  and  Remote  Access  is  configured  to  allow

virtual private network (VPN) connections that are as secure as possible.

You need to connect the Windows Mobilebased devices to the VPN server. You also need to ensure that

both ends of the VPN tunnel are authenticated.

Which two actions should you perform? (Each correct answer presents part of the solution. Choose two)

A. Select L2TP/IPSec on each Windows Mobilebased device.

B. Obtain and install a certificate on each Windows Mobilebased device.

C. Configure the appropriate pre-shared key on each Windows Mobilebased device.

D. Select Point-to-Point Tunneling Protocol (PPTP) on each Windows Mobilebased device.

Answer: AB

9. You deploy mobile devices that run Microsoft Windows Mobile 5.0.

Company  security  policy  requires  an  authentication  process  that  is  stronger  than  a  user  name  and

password combination.

You  need  to  ensure  that  Microsoft  ActiveSync  sessions  use  an  authentication  process  that  meets  the

company security policy.

What should you do?

A. Deploy a two-factor authentication process.

B. Deploy a single-factor authentication process.

C. Deploy a simple PIN policy for the Windows Mobilebased devices.

D. Deploy a complex PIN policy for the Windows Mobilebased devices.

Answer: A

10. You deploy a mobile messaging solution by using front-end and back-end servers that run Microsoft

Exchange Server 2003 Service Pack 2. Certificates are installed on all Microsoft Windows  Mobilebased

devices.

You   need   to  allow  devices   that  run  Microsoft   Windows     Mobile   5.0  to  perform   certificate-based

authentication for Microsoft Exchange ActiveSync.

What should you do?

A. Configure the front-end server for Kerberos Constrained Delegation (KCD).

B. Configure a Routing Group Connector between the front-end and back-end servers.

C. Configure the Windows Mobilebased devices with a Point-to-Point Protocol (PPTP) connection.

D. Configure the Windows Mobilebased devices to use Extensible Authentication Protocol (EAP) and either

a smart card or a certificate.

Answer: A