PD0-001 Exam

1. Which of the following functions is associated with the developer unit?
A. Supplies toner to the photoconductor
B. Charges the surface of the photoconductor
C. Writes the latent image on the photoconductor
D. Cleans the photoconductor
Answer: A

2. An encoder sensor typically detects:
A. paper position.
B. shaft rotation.
C. magnetic flux.
D. laser beam strength.
Answer: B

3. The customer has a dedicated ink jet fax machine that is used to send and receive faxes only from the
corporate office. The user complains of streaks on the received faxes while the internal self-prints are fine.
Which of the following should a technician recommend?
A. Clean the scanner glass on the distant machine.
B. Clean the scanner glass on the local machine.
C. Clean the printer head on the local machine.
D. Call the telephone company to increase the line signal level.
Answer: A

4. Which of the following stages in the laser print process attracts toner to the latent image on the
photoconductor?
A. Writing
B. Fusing
C. Development
D. Transfer
Answer: C

5. Which of the following would be the BEST process for the technician to follow when beginning to
diagnose a unit at a customers site?
A. Check the printers error log, and then inform the primary user what the issue is.
B. Go directly to the printer and investigate any issues that are found.
C. Investigate the printers status, then ask the primary user to write down what they think is wrong.
D. Gather information from the primary user, and then evaluate the printers condition.
Answer: D

6. Which of the following utilities could be used to determine a subnet mask?
A. PING
B. NSLOOKUP
C. TRACERT
D. IPCONFIG
Answer: D

7. How many CCDs are located in a single pass duplex ADF?
A. One
B. 2
C. 3
D. 4
Answer: B

8. When is it advisable to dump the waste toner from a technicians service vacuum?
A. When it is full.
B. It is not recommended.
C. Before performing preventative maintenance.
D. After each call.
Answer: B

9. A customer has installed a new computer on their network. They can print to the printer but the option for
duplex printing is not available. All other computers have the option. Which of the following is the cause of
the problem?
A. The new computer is printing to the wrong IP address.
B. The new computer is using the wrong protocol.
C. The driver port is not setup correctly.
D. The option has not been selected on the driver.
Answer: D

10. A polygon mirror is part of which of the following assemblies?
A. Laser unit
B. Developer unit
C. Charge assembly
D. Fuser assembly
Answer: A

11. In which of the following sections of an MFP would a technician find a Xenon Lamp?
A. The paper feed section
B. The fuser section
C. The scanner section
D. The transfer section
Answer: C

12. During the photoconductor preparation step, residual charge can be removed by which of the following?
(Select TWO).
A. Pressure
B. Oil
C. Light
D. Gravity
E. Electrical Charge
Answer: CE

13. Which of the following components is part of the ink dispersion system?
A. Print Heads
B. Cleaning heads
C. Pickup Roller
D. Charge Assembly
Answer: A

14. The proper safety guidelines for handling any device specific consumables can be found in which of the
following documentation?
A. Material Safety Data Sheets
B. Installation Guides
C. Consumer Reports
D. Devices Parts Catalog
Answer: A

15. A customer is concerned about excessive media jamming in their device. Which of the following is the
FIRST thing a technician should check?
A. Media feed rollers
B. Cassette drawers
C. Fusing section
D. Device log data
Answer: D

16. The polygon mirror is located in which of the following components?
A. Developer unit
B. Scanner unit
C. Fuser unit
D. Laser unit
Answer: D

17. Which of the following is the purpose of a torque limiter in a roller?
A. To reduce wear and tear on rollers.
B. To provide resistance but still allow some slippage.
C. To limit the amount of movement by media.
D. To make it easier to replace rollers.
Answer: B

18. Using the CMYK color model, the color purple is produced by combining cyan and which other color?
A. Green
B. Magenta
C. Yellow
D. Black
Answer: B

19. Which of the following is a reason black toner is used in color printers?
A. It decreases the print speed in color laser printers.
B. It prevents moir patterns when printing color photographs.
C. It reduces the cost per page when printing gray scale documents.
D. It makes the color toner resistant to smudging when wet.
Answer: C

20. A technician is troubleshooting a network connectivity issue on a MFD and would like to eliminate the
possibility of another device on the network having the same IP address. The technician should:
A. disconnect the MFD and ping the IP address.
B. disconnect the MFD and ping the subnet mask.
C. disconnect the MFD and ping the loopback address.
D. run the ipconfig command from the command prompt.
Answer: A

Click Online chat to talk with us , get more informations about CompTIA PDI+ PD0-001 practice exam study guides questions and answers

Quality and Value for the PD0-001 Exam

Test4pass Practice Exams for CompTIA PD0-001 are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.

100% Guarantee to Pass Your PD0-001 Exam

If you prepare for the exam using our Test4pass testing engine, we guarantee your success in the first attempt. If you do not pass the PDI+ PD0-001 exam (ProCurve Secure WAN) on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.

CompTIA PD0-001 Downloadable, Printable Exams (in PDF format)

Our Exam PD0-001 Preparation Material provides you everything you will need to take your PD0-001 Exam. The PD0-001 Exam details are researched and produced by Professional Certification Experts who are constantly using industry experience to produce precise, and logical. You may get questions from different web sites or books, but logic is the key. Our Product will help you not only pass in the first try, but also save your valuable time.

PD0-001 Downloadable, Interactive Testing engines

We are all well aware that a major problem in the IT industry is that there is a lack of quality study materials. Our Exam Preparation Material provides you everything you will need to take a certification examination. Like actual certification exams, our Practice Tests are in multiple-choice (MCQs) Our CompTIA PD0-001 Exam will provide you with free PD0-001 dumps questions with verified answers that reflect the actual exam. These questions and answers provide you with the experience of taking the actual test. High quality and Value for the PD0-001 Exam:100% Guarantee to Pass Your PDI+ exam and get your PDI+ Certification.

Test4pass PD0-001 exam
Test4pass PD0-001 pdf exam
Test4pass PD0-001 braindumps
Test4pass PD0-001 study guides
Test4pass PD0-001 trainning materials
Test4pass PD0-001 simulations
Test4pass PD0-001 testing engine
Test4pass PD0-001 vce
Test4pass PD0-001 torrent
Test4pass PD0-001 dumps
free download PD0-001
Test4pass PD0-001 practice exam
Test4pass PD0-001 preparation files
Test4pass PD0-001 questions
Test4pass PD0-001 answers

http://www.test4pass.com/PD0-001-exam.html The safer.easier way to get PDI+ Certification .