HP0-790 Exam
HP ProCurve Routing Switch Essentials v5.21
- Exam Number/Code : HP0-790
- Exam Name : HP ProCurve Routing Switch Essentials v5.21
- Questions and Answers : 57 Q&As
- Update Time: 2011-09-21
- Price:
$ 119.00$ 69.00
Free HP0-790 Demo Download
Test4pass offers free demo for HP ASE HP0-790 exam (HP ProCurve Routing Switch Essentials v5.21). You can check out the interface, question quality and usability of our practice exams before you decide to buy it. We are the only one site can offer demo for almost all products.
Exam Description
It is well known that HP0-790 exam test is the hot exam of HP certification. Test4pass offer you all the Q&A of the HP0-790 real test . It is the examination of the perfect combination and it will help you pass HP0-790 exam at the first time!
Why choose Test4pass HP0-790 braindumps
Quality and Value for the HP0-790 Exam
100% Guarantee to Pass Your HP0-790 Exam
Downloadable, Interactive HP0-790 Testing engines
Verified Answers Researched by Industry Experts
Drag and Drop questions as experienced in the Actual Exams
Practice Test Questions accompanied by exhibits
Our Practice Test Questions are backed by our 100% MONEY BACK GUARANTEE.
HP HP ASE HP0-790 exam braindumps questions and answers
¡¡
Exam : HP HP0-790
Title : HP ProCurve Routing Switch Essentials
1. The administrator of a ProCurve Routing Switch 9300m enters spanning-tree in the global configuration context. Which Spanning Tree topology is enabled on the switch?
A. Single-instance Spanning Tree
B. Rapid Spanning Tree
C. Extended Spanning Tree
D. Per-VLAN Spanning Tree
Answer: D
2. On the ProCurve Routing Switch 9300m, which step is necessary to enable the logging of system events related to ACL matching?
A. Enable ACL logging in the global configuration context.
B. Enable ACL logging in the configuration context for a named ACL.
C. Use the log parameter in the statement that creates an ACL entry.
D. Use the log parameter in the statement that binds an ACL to an interface.
Answer: C
3. You must set 802.1w Bridge Priorities for a ProCurve Routing Switch 9300m and a Switch 5300xl. What is a difference between the Bridge Priority settings on these two models?
A. On the 9300m, the Bridge Priority is set at actual value. The 5300xl uses a multiplier.
B. The 9300m supports 4096 Bridge Priority values. The 5300xl supports 16.
C. On the 5300xl, 0 is the lowest Bridge Priority. On the 9300m, 0 is the normal priority.
D. The 5300xl supports a separate Bridge Priority for each STP instance. On the 9300m, a single priority is applied to all STP instances.
Answer: A
4. On the ProCurve Routing Switch 9300m, what is a difference between hardware-based ACLs and flow-based ACLs?
A. Hardware-based ACLs must be extended ACLs. Flow-based ACLs can be extended or standard.
B. Hardware-based ACLs use the route table in the management module to perform lookups. Flow-based ACLs use the interface module's
session table.
C. Packets subject to flow-based ACLs are compared with session table entries. Packets subject to hardware-based ACLs are compared with
CAM entries.
D. The application of hardware-based ACLs results in static CAM entries. CAM entries for flow-based ACLs are created as needed and aged out
when not needed.
Answer: D
5. Why are extended ACLs more appropriate for traffic-filtering applications than standard ACLs?
A. Extended ACLs use simpler syntax.
B. Extended ACLs use bandwidth more efficiently.
C. Extended ACLs support more matching criteria.
D. Extended ACLs are easier to deploy on multiple switches.
Answer: C
6. The global context in the running configuration of a ProCurve Routing Switch 9300m includes the spanning-tree single 802-1w command. However, each of the VLAN contexts includes the spanning-tree command. How will the switch implement Spanning Tree?
A. The switch will implement the Spanning Tree version included in BPDUs it receives from neighbors.
B. The switch will implement a single instance of IEEE 802.1w.
C. The switch will not join a Spanning Tree because of the mismatch between configured versions.
D. The switch will implement per-VLAN IEEE 802.1D and ignore the global configuration command.
Answer: B
7. What is the size of the address range specified in the following ACL entry? access-list 1 permit 192.168.192.0 0.0.1.255?
A. 256 addresses
B. 512 addresses
C. 1,024 addresses
D. 65,536 addresses
E. 16,777,216 addresses
Answer: B
8. What is the effect of the following ACL when it is applied inbound to a router interface? access-list 101 permit tcp any any eq telnet
A. The router will allow all Telnet traffic sent through this interface. Other traffic will be denied.
B. The router will allow all Telnet traffic received through this interface. Other traffic will be denied.
C. The router will deny all Telnet traffic sent through this interface. All other traffic will be permitted.
D. The router will allow all Telnet traffic sent or received on this interface. Other traffic will be denied.
Answer: B
9. Which step is necessary to enable administrators to use the web interface to make configuration changes on a ProCurve Routing Switch 9300m?
A. Configure local user accounts.
B. Assign a password to the system-defined super user.
C. Configure SNMP management workstations at the CLI.
D. Define a read/write SNMP community.
Answer: D
10. What is a valid application for ACLs on the ProCurve Routing Switch 9300m?
A. balancing traffic across redundant links
B. defining address pools to be used in NAT
C. summarizing routes learned through OSPF
D. choosing between equal-cost paths in the IP route table
Answer: B
11. How can you apply four ACL entries to a single interface on a 9300m?
A. Assign the same ACL ID to each of the four entries and use a single statement to associate the common ACL ID with the interface.
B. Assign a unique ACL ID to each of the four entries and use a single command to associate the four IDs with the interface.
C. Assign a unique ACL ID to each of the four entries and use a separate statement to associate each ACL ID with the interface.
D. Each interface can support only one inbound ACL entry and one outbound ACL entry.
Answer: A
12. You must configure a ProCurve Routing Switch 9300m that has two management modules and is set to factory defaults. You will use a direct serial connection to perform the initial configuration. To which management module should you connect?
A. The module with the Active LED lit.
B. The module in the highest numbered slot.
C. Either management module can be used.
D. The module with the lowest MAC address.
Answer: A
13. A customer network includes a ProCurve Routing Switch 9300m and several 5300xl switches. If the 5300s are configured at default, which protocol must be enabled on the 9300m in order for all the switches to participate in a single Spanning Tree domain?
A. IEEE 802.1X
B. IEEE 802.1Q
C. IEEE 802.1s
D. IEEE 802.1w
Answer: D
14. How are changes to the running configuration of a ProCurve Routing Switch 9300m retained?
A. immediately written to dynamic memory
B. written to dynamic memory when the administrator issues the write memory command
C. immediately written to flash memory
D. written to non-volatile memory when the switch is restarted
Answer: A
Click Online chat to talk with us , get more informations about HP HP ASE HP0-790 practice exam study guides questions and answers
Test4pass HP0-790 Exam Features
Quality and Value for the HP0-790 Exam
Test4pass Practice Exams for HP HP0-790 are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.
100% Guarantee to Pass Your HP0-790 Exam
If you prepare for the exam using our Test4pass testing engine, we guarantee your success in the first attempt. If you do not pass the HP ASE HP0-790 exam (ProCurve Secure WAN) on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.
HP HP0-790 Downloadable, Printable Exams (in PDF format)
Our Exam HP0-790 Preparation Material provides you everything you will need to take your HP0-790 Exam. The HP0-790 Exam details are researched and produced by Professional Certification Experts who are constantly using industry experience to produce precise, and logical. You may get questions from different web sites or books, but logic is the key. Our Product will help you not only pass in the first try, but also save your valuable time.
HP0-790 Downloadable, Interactive Testing engines
We are all well aware that a major problem in the IT industry is that there is a lack of quality study materials. Our Exam Preparation Material provides you everything you will need to take a certification examination. Like actual certification exams, our Practice Tests are in multiple-choice (MCQs) Our HP HP0-790 Exam will provide you with free HP0-790 dumps questions with verified answers that reflect the actual exam. These questions and answers provide you with the experience of taking the actual test. High quality and Value for the HP0-790 Exam:100% Guarantee to Pass Your HP ASE exam and get your HP ASE Certification.
Test4pass HP0-790 examTest4pass HP0-790 pdf exam
Test4pass HP0-790 braindumps
Test4pass HP0-790 study guides
Test4pass HP0-790 trainning materials
Test4pass HP0-790 simulations
Test4pass HP0-790 testing engine
Test4pass HP0-790 vce
Test4pass HP0-790 torrent
Test4pass HP0-790 dumps
free download HP0-790
Test4pass HP0-790 practice exam
Test4pass HP0-790 preparation files
Test4pass HP0-790 questions
Test4pass HP0-790 answers
http://www.test4pass.com/HP0-790-exam.html The safer.easier way to get HP ASE Certification
.
My Shopping Cart
