HP0-759 Exam

HP ProCurve Combined Security and Mobility Exam

Exam Number/Code : HP0-759
Exam Name : HP ProCurve Combined Security and Mobility Exam
Questions and Answers : 85 Q&As
Update Time: 2011-09-21
Price: ~~$ 119.00~~ $ 69.00

HP0-759

Free HP0-759 Demo Download

Test4pass offers free demo for Certification I HP0-759 exam (HP ProCurve Combined Security and Mobility Exam). You can check out the interface, question quality and usability of our practice exams before you decide to buy it. We are the only one site can offer demo for almost all products.

Exam Description

It is well known that HP0-759 exam test is the hot exam of HP certification. Test4pass offer you all the Q&A of the HP0-759 real test . It is the examination of the perfect combination and it will help you pass HP0-759 exam at the first time!

Why choose Test4pass HP0-759 braindumps

Quality and Value for the HP0-759 Exam
100% Guarantee to Pass Your HP0-759 Exam
Downloadable, Interactive HP0-759 Testing engines
Verified Answers Researched by Industry Experts
Drag and Drop questions as experienced in the Actual Exams
Practice Test Questions accompanied by exhibits
Our Practice Test Questions are backed by our 100% MONEY BACK GUARANTEE.

HP Certification I HP0-759 exam braindumps questions and answers

��
��
Exam : HP HP0-759
Title : HP ProCurve Combined Security and Mobility E

1. You are installing an access point that is transmitting at 16 dBm. It is connected to a directional patch antenna with a rating of 6.5 dBi through a cable and connector set that is rated at 2.5 dBi. What is the effective gain of this configuration?
A. 25 dB
B. 20 dB
C. 12 dB
D. 30 db
Answer: B

2. While probing a wireless network using the wireless client utility on you computer, you can see that several different SSIDs are shown to be available. Which procedure has your wireless card just performed?
A. a passive scan
B. a WPA PSK refresh
C. an active scan
D. a WEP key refresh
Answer: C

3. Which actions should be taken to test access point coverage during a site survey? Select THREE.
A. Temporarily install an access point to test and measure signal to noise ratio levels.
B. Use a wireless enabled portable device running an SNR analyzer tool.
C. Configure all access points to use the same channel and enable bridge mode operation on all access points. Test connectivity and roaming once the site AP's are setup in bridge mode.
D. Enable and verify 802.1X security to insure proper signal encryption and strength.
E. Configure overlapping cells using non-overlapping channels and test for coverage.
F. Configure WEP keys on client and access points.
G. Configure a WDS link between two access points.
Answer: ABE

4. Two wireless stations are located in close proximity to the same access point. Which mechanisms prevent them from transmitting at the same time? Select TWO.
A. CSMA-CD
B. SYN/ACK
C. CSMA-CA
D. MAC/LLC
E. RTS/CTS
Answer: CE

5. Click the Exhibit button.
A customer is located on the top floor of a three-story building. The second floor already has an existing 802.11b network using channels 1, 6 and 11. The customer on the third floor wants to install an 802.11b network and requires three access points. Which channels should be used for the three access points? Select TWO.
A. AP-A: channel 1, AP-B: channel 6 and AP-C: channel 11
B. AP-A: channel 7, AP-B: channel 8 and AP-C: channel 9
C. AP-A: channel 11, AP-B: channel 1 and AP-C: channel 6
D. AP-A: channel 2, AP-B: channel 3 and AP-C: channel 4
E. AP-A: channel 6, AP-B: channel 11 and AP-C: channel 1
Answer: CE

6. Given the complicated nature of wireless bridging, what must be considered before implementation? Select THREE.
A. auto channel select must be enabled
B. circular links require spanning tree to be set
C. WDS links need to be set to same frequency channel
D. multiple hop links need to be reduced to less than three
E. multiple hop links may lead to long end-to-end latency figures
F. circular links can create IP loops leading to increased performance
G. WDS links need to be set to alternating frequency channels using 1, 6 and 11
Answer: BCE

7. Clients A and B attempt to communicate with access point C at the same time and a collision occurs because they cannot detect each other's transmissions. Which problem does this illustrate?
A. fast transform
B. retransmission
C. key mis-match
D. hidden client
Answer: D

8. A customer has asked you to design a wireless network for his office using HP 420 Access Points. In one area you decide to use a directional antenna to ensure that the wireless signal propagates down a long hallway. If you wish to limit the radiated power to 1 Watt, what is the highest gain directional antenna that you can use if the access point it is connected to is transmitting at full power?
A. 2 dBm
B. 6.5 dBm
C. 10 dBm
D. 14 dBm
Answer: C

9. A user is authenticated through a ProCurve 420 with VLANs enabled. However, the RADIUS authentication server does not return a VLAN attribute. What will happen to the user? The user will be _______.
A. placed in the Unauthorized VLAN
B. denied access completely
C. placed on the Management VLAN
D. placed in the access point's Native VLAN
Answer: D

10. What is the valid range for client VLAN IDs on a ProCurve 420?
A. 1-64
B. 1-128
C. 1-2048
D. 1-4095
Answer: D

11. Site surveys are best done at the pre-sales stage in order to provide a customer with a rough estimate of what their investment will be. What are some important results derived from a site survey? Select TWO.
A. How far should the APs be spaced apart (what cell size is needed)?
B. Are there available dedicated power circuits for AP usage to limit noise feedback?
C. Base estimated cell radius of 33 meters supporting 60-90 users at 5.5 Mbps aggregate bandwidth.
D. How many APs will be required in a given area (cell density)?
E. Use an Ultrasonic Wave Analyzer to test signal to noise ratio for proper placement of access points.
Answer: AD

12. During a wireless implementation for a local college you plan to use omni-directional diversity antennas for the internal public areas of the campus. You chose these antennas because they provide RF coverage in ________ of the antenna.
A. a concentrated direction around the horizontal axis
B. all directions around the vertical axis
C. a particular direction along the vertical axis
D. all directions around the horizontal axis
Answer: B

13. A customer has noticed that the throughput on his wireless network is not sufficient for his business requirements. As a first step in trying to alleviate this problem, you decide to increase the multicast rate on all of his access points to the maximum setting. This will help to improve real throughput because the multicast rate is the _______.
A. rate at which WEP keys are refreshed
B. rate at which access points send out beacon frames to clients
C. rate at which control and management frames are transmitted to all associated clients
D. raw data rate at which packets are transmitted between a single client and access point
Answer: C

14. When designing wireless networks, it is important to remember that government agencies limit the power of RF based networks in certain radio bands. The emitted power of a radio transmitter and any attached antenna is known as its ________.
A. Radiated Radio Frequency Power
B. WIreless System Power Radiation
C. Effective Isotropic Radiated Power
D. Effective Total Power Output
Answer: C

Click Online chat to talk with us , get more informations about HP Certification I HP0-759 practice exam study guides questions and answers

Test4pass HP0-759 Exam Features

Quality and Value for the HP0-759 Exam

Test4pass Practice Exams for HP HP0-759 are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.

100% Guarantee to Pass Your HP0-759 Exam

If you prepare for the exam using our Test4pass testing engine, we guarantee your success in the first attempt. If you do not pass the Certification I HP0-759 exam (ProCurve Secure WAN) on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.

HP HP0-759 Downloadable, Printable Exams (in PDF format)

Our Exam HP0-759 Preparation Material provides you everything you will need to take your HP0-759 Exam. The HP0-759 Exam details are researched and produced by Professional Certification Experts who are constantly using industry experience to produce precise, and logical. You may get questions from different web sites or books, but logic is the key. Our Product will help you not only pass in the first try, but also save your valuable time.

HP0-759 Downloadable, Interactive Testing engines

We are all well aware that a major problem in the IT industry is that there is a lack of quality study materials. Our Exam Preparation Material provides you everything you will need to take a certification examination. Like actual certification exams, our Practice Tests are in multiple-choice (MCQs) Our HP HP0-759 Exam will provide you with free HP0-759 dumps questions with verified answers that reflect the actual exam. These questions and answers provide you with the experience of taking the actual test. High quality and Value for the HP0-759 Exam:100% Guarantee to Pass Your Certification I exam and get your Certification I Certification.

Test4pass HP0-759 exam
Test4pass HP0-759 pdf exam
Test4pass HP0-759 braindumps
Test4pass HP0-759 study guides
Test4pass HP0-759 trainning materials
Test4pass HP0-759 simulations
Test4pass HP0-759 testing engine
Test4pass HP0-759 vce
Test4pass HP0-759 torrent
Test4pass HP0-759 dumps
free download HP0-759
Test4pass HP0-759 practice exam
Test4pass HP0-759 preparation files
Test4pass HP0-759 questions
Test4pass HP0-759 answers

http://www.test4pass.com/HP0-759-exam.html The safer.easier way to get Certification I Certification .