HP0-207 Exam
Procurve Adaptive EDGE Fundamentals
- Exam Number/Code : HP0-207
- Exam Name : Procurve Adaptive EDGE Fundamentals
- Questions and Answers : 120 Q&As
- Update Time: 2011-09-21
- Price:
$ 119.00$ 69.00
Free HP0-207 Demo Download
Test4pass offers free demo for Certification III HP0-207 exam (Procurve Adaptive EDGE Fundamentals). You can check out the interface, question quality and usability of our practice exams before you decide to buy it. We are the only one site can offer demo for almost all products.
Exam Description
It is well known that HP0-207 exam test is the hot exam of HP certification. Test4pass offer you all the Q&A of the HP0-207 real test . It is the examination of the perfect combination and it will help you pass HP0-207 exam at the first time!
Why choose Test4pass HP0-207 braindumps
Quality and Value for the HP0-207 Exam
100% Guarantee to Pass Your HP0-207 Exam
Downloadable, Interactive HP0-207 Testing engines
Verified Answers Researched by Industry Experts
Drag and Drop questions as experienced in the Actual Exams
Practice Test Questions accompanied by exhibits
Our Practice Test Questions are backed by our 100% MONEY BACK GUARANTEE.
HP Certification III HP0-207 exam braindumps questions and answers
¡¡
Exam : HP HP0-207
Title : Procurve Adaptive EDGE Fundamentals
1. You must update the software on a customer's ProCurve Switch 5412zl. Which statement correctly describes the process for this operation? Select TWO.
A. Use TFTP for direct serial transfer of the software.
B. Use FTP for in-band transfer of the software through an IP network.
C. Use TFTP for in-band transfer of the software through an IP network.
D. Transfer the software from your workstation using a direct serial transfer.
E. Instruct the switch to search for any available TFTP server without knowing its IP address.
Answer: CD
2. On switches that support the Switch Setup screen interface, which parameters can be configured on the Switch Setup screen? Select TWO.
A. STP bridge priority
B. IP address of the TACACS+ server
C. system name and contact information
D. IP address and subnet mask for each VLAN
E. IP address and subnet mask for the default VLAN
Answer: CE
3. What are the primary solution categories of the Adaptive EDGE Architecture? Select THREE.
A. mobility
B. security
C. reliability
D. availability
E. upgradeability
F. convergence
G. cost-effectiveness
Answer: ABF
4. You are assigned to configure ProCurve switches at a customer site for in-band management. Which are in-band management methods? Select TWO.
A. Telnet
B. SNMP
C. XMODEM
D. serial console
E. menu interface
Answer: AB
5. While using the CLI to configure a ProCurve switch, you must move from the global configuration level to the port context configuration level for port a1. Which command do you use?
A. port a1
B. ethernet a1
C. interface a1
D. configure a1
Answer: C
6. A customer is planning a Power over Ethernet deployment for a large call center that will use VoIP telephones. While planning the wiring closets for the deployment, the customer suggests using the uplink ports of a ProCurve Switch 2650-PWR to provide power to a ProCurve Switch 2600-8-PWR. Which statement describes a correct response to this suggestion?
A. It is only possible if the second switch is a ProCurve Switch 2626-PWR.
B. It is not possible because the 2600-8-PWR cannot act as a Powered Device.
C. It is only possible if the customer adds a ProCurve 600 EPS/RPS to the first switch.
D. It is not recommended because the second switch will not have adequate power redundancy.
Answer: B
7. While using the CLI to configure a ProCurve switch, you must change context from the manager level to the global configuration level. Which command do you use?
A. exit
B. write
C. global
D. enable
E. configure
Answer: E
8. You are installing a ProCurve switch at a customer site and must enable remote management for network administrators. Which configuration parameter is necessary to ensure that administrators can manage the switch even if they are on different IP networks?
A. default VLAN
B. default gateway
C. default password
D. default management profile
Answer: B
9. You have been asked to configure IGMP on a ProCurve Switch 6200yl at a customer site. What are the steps for enabling IGMP on the switch?
A. Enter the manager level, then issue the ip igmp command.
B. Enter the global configuration context, then issue the ip igmp command.
C. Enter the VLAN context for each VLAN that will support IGMP, then issue the ip igmp command.
D. Enter the interface configuration context for each port configured with a VLAN, then issue the ip igmp command.
Answer: C
10. You are configuring a ProCurve Layer 2 switch to obtain time information from an SNTP server located on a different IP network than the switch. Which configuration steps are necessary on the switch to enable this functionality?
A. The switch cannot be configured to obtain time information from a server on a different IP network.
B. Define a default gateway for the switch, enable SNTP, use the sntp server command to enter the IP address of the server.
C. Assign a port on the switch to a VLAN that includes the SNTP server, enable SNTP, configure the switch for SNTP unicast mode.
D. Configure an IP address on the same IP network as the SNTP server, enable TimeP, configure the switch for SNTP broadcast mode.
Answer: B
11. What are the key principles of the Adaptive EDGE architecture? Select TWO.
A. Control to the Edge
B. Control to the Desktop
C. Command from the Center
D. Management from Anywhere
E. Security throughout the Network
Answer: AC
12. You are about to update the software on a ProCurve switch. Which command do you use to view a list of all software versions stored on the switch?
A. show run
B. show flash
C. show startup
D. show version
Answer: B
13. You must remotely manage a customer's switch using Telnet. Which configuration/monitoring interfaces are available? Select TWO.
A. web interface
B. menu interface
C. ProCurve Manager
D. boot monitor interface
E. command line interface
Answer: BE
14. How is traffic prioritization accomplished with IEEE 802.1p?
A. 802.1Q-compliant devices enforce priorities based on VLAN ID.
B. 802.1Q-compliant devices set one of 8 values in a 3-bit field in the VLAN tag.
C. 802.1Q-compliant devices set one of 64 values in a 6-bit field in the IP datagram header.
D. 802.1Q-compliant devices dedicate a portion of available bandwidth to each prioritized conversation.
Answer: B
Click Online chat to talk with us , get more informations about HP Certification III HP0-207 practice exam study guides questions and answers
Test4pass HP0-207 Exam Features
Quality and Value for the HP0-207 Exam
Test4pass Practice Exams for HP HP0-207 are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.
100% Guarantee to Pass Your HP0-207 Exam
If you prepare for the exam using our Test4pass testing engine, we guarantee your success in the first attempt. If you do not pass the Certification III HP0-207 exam (ProCurve Secure WAN) on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.
HP HP0-207 Downloadable, Printable Exams (in PDF format)
Our Exam HP0-207 Preparation Material provides you everything you will need to take your HP0-207 Exam. The HP0-207 Exam details are researched and produced by Professional Certification Experts who are constantly using industry experience to produce precise, and logical. You may get questions from different web sites or books, but logic is the key. Our Product will help you not only pass in the first try, but also save your valuable time.
HP0-207 Downloadable, Interactive Testing engines
We are all well aware that a major problem in the IT industry is that there is a lack of quality study materials. Our Exam Preparation Material provides you everything you will need to take a certification examination. Like actual certification exams, our Practice Tests are in multiple-choice (MCQs) Our HP HP0-207 Exam will provide you with free HP0-207 dumps questions with verified answers that reflect the actual exam. These questions and answers provide you with the experience of taking the actual test. High quality and Value for the HP0-207 Exam:100% Guarantee to Pass Your Certification III exam and get your Certification III Certification.
Test4pass HP0-207 examTest4pass HP0-207 pdf exam
Test4pass HP0-207 braindumps
Test4pass HP0-207 study guides
Test4pass HP0-207 trainning materials
Test4pass HP0-207 simulations
Test4pass HP0-207 testing engine
Test4pass HP0-207 vce
Test4pass HP0-207 torrent
Test4pass HP0-207 dumps
free download HP0-207
Test4pass HP0-207 practice exam
Test4pass HP0-207 preparation files
Test4pass HP0-207 questions
Test4pass HP0-207 answers
http://www.test4pass.com/HP0-207-exam.html The safer.easier way to get Certification III Certification
.
