920-221 Exam
Nortel Convered Campus ERS Installation & Configuration
- Exam Number/Code : 920-221
- Exam Name : Nortel Convered Campus ERS Installation & Configuration
- Questions and Answers : 59 Q&As
- Update Time: 2011-09-21
- Price:
$ 119.00$ 69.00
Free 920-221 Demo Download
Test4pass offers free demo for NCSS 920-221 exam (Nortel Convered Campus ERS Installation & Configuration). You can check out the interface, question quality and usability of our practice exams before you decide to buy it. We are the only one site can offer demo for almost all products.
Exam Description
It is well known that 920-221 exam test is the hot exam of Nortel certification. Test4pass offer you all the Q&A of the 920-221 real test . It is the examination of the perfect combination and it will help you pass 920-221 exam at the first time!
Why choose Test4pass 920-221 braindumps
Quality and Value for the 920-221 Exam
100% Guarantee to Pass Your 920-221 Exam
Downloadable, Interactive 920-221 Testing engines
Verified Answers Researched by Industry Experts
Drag and Drop questions as experienced in the Actual Exams
Practice Test Questions accompanied by exhibits
Our Practice Test Questions are backed by our 100% MONEY BACK GUARANTEE.
Nortel NCSS 920-221 exam braindumps questions and answers
¡¡
Exam : Nortel 920-221
Title : Nortel Convered Campus ERS Installation & Configuration
1. A customer would like to configure an IP address for an existing VLAN on an Ethernet Routing Switch 5510. You use the following Command Line Interface (CLI) command sequence:
From the initial CLI prompt, enter privilege mode, enter config mode, enter config-if mode for the VLAN interface. Enter the command, "ip address".
What information do you enter next?
A. Enter the appropriate IP address of the backup CPU.
B. Enter the appropriate IP address and subnet mask in dotted decimal notation.
C. Enter the appropriate IP address for the out-of-band management port.
D. Enter the appropriate IP address for the in-band management port.
Answer: B
2. A customer is initially configuring an Ethernet Routing Switch 8300 to connect Internet Telephones. The management tasks will be performed on different subnets. Which two parameters must first be set to allow the switch to be accessed remotely for management purposes? (Choose two.)
A. BootP request mode
B. default gateway
C. management VLAN
D. IP address/subnet mask
Answer: BD
3. You are using the Java Device Manager to modify the Management Information Base (MIB) variables in the Ethernet Routing Switch 8600. Which protocol does the Java Device Manager use to make this modification?
A. Border Gateway Protocol (BGP)
B. Dynamic Host Configuration Protocol (DHCP)
C. Simple Network Management Protocol (SNMP)
D. Transmission Control Protocol (TCP)
Answer: C
4. You are installing an Ethernet Routing Switch 5500 and you have ensured that environmental and electrical requirements are satisfied on the Ethernet Routing Switch. Which is your first step for installation?
A. Follow Electrical Static Discharge (ESD) procedures.
B. Mount switch securely in rack or to the wall.
C. Provide a console terminal.
D. Check the software and diagnostic image versions.
Answer: A
5. You can use the User Interface (UI) button on the Ethernet Routing Switch 5500 to temporarily reset a switch to the default IP address. Which two statements are true about the default IP address set via the UI button? (Choose two.)
A. The default IP address overrides the IP address currently in use by the switch stack.
B. The default IP address overwrites the onfigured IP address settings that are set via console, Command Line Interface (CLI), or Web.
C. The default IP address changes if there is a change in the state of the switch, such as if the switch joins or leaves a stack.
D. The default IP address is saved in NVRAM across resets of the switch/stack.
Answer: AC
6. A customer is configuring stacking on the Ethernet Routing Switch 4500. Which two statements are true about how to connect the stacks? (Choose two.)
A. To select a unit as a base unit, move the Unit Select switch to Base.
B. The Cascade Down connector is used to connect a switch to the next unit in the stack through a cascade cable.
C. The Cascade Up connector provides an attachment point that accepts a cascade cable connection from another unit in the stack.
D. For the stack to form, configure two associated units as the base units.
Answer: BC
7. With Release 4.0+ software on the Ethernet Routing Switch (ERS) 8300, you are required to have an Advanced Routing License to enable certain features. Which two statements are true about the Advanced Routing License process and supported features for the ERS 8300? (Choose two.)
A. The Advanced Routing License supports SMLT, VRRP, and OSPF.
B. The Advanced Routing License supports SMLT, VRRP, OSPF, PIM-SM, and SLPP.
C. To protect against security breaches, the ERS 8300 lets you define only a primary path for the license file.
D. To protect against system flash failures, the ERS 8300 lets you define a primary, secondary, and tertiary path for the license file.
Answer: AD
8. Which two statements are true about Power over Ethernet (PoE)? (Choose two.)
A. PoE requires a significant increase in power capacity.
B. PoE enables cooling systems and load-sharing power supplies.
C. PoE provides increased power, resiliency, and redundancy at low cost.
D. PoE is used to power IP telephones, Web cameras, and access points.
Answer: AD
9. Using the Command Line Interface, how do you change an IP address on the Ethernet Routing Switch 8600 switch?
A. Use the VLAN Manager.
B. Delete and recreate the IP address.
C. Run the ipchange command.
D. Reset the switch and then configure the address again.
Answer: B
10. Which set of procedures will correctly upgrade the boot monitor on the Ethernet Routing Switch 8600?
A. Copy the new image to flash.
Boot the new image.
B. Copy the new image to flash.
Modify the boot choice for run-time image.
Boot the new image.
C. Upgrade the backup CPU.
Switch over.
Upgrade the remaining CPU.
Boot the new image.
D. Modify the boot choice for run-time image.
Boot the new image
Answer: A
11. A customer needs to install a new Ethernet Routing Switch 2550T on the 172.16.5.0/24 network, but does not have a console cable available. The customer will attempt to set the IP address by using Telnet to connect to the switch. Which two statements are correct? (Choose two.)
A. It is not possible to connect to a switch by using Telnet if you have not set the IP address though the console interface first.
B. The switch will first attempt to use BootP to acquire an IP address, and when that fails it will use the IP address 192.168.1.1/24.
C. The customer must first configure the PC to use an address on the 192.168.1.0/24 network before attempting to connect to the switch.
D. The customer must set the switch to use the temporary address of 192.168.192.168 by pressing the User Interface button on the front of the ESR 2550T.
Answer: BC
12. An engineer needs to assign an IP address of 172.25.10.36 to an Ethernet Routing Switch 8600 switch with a subnet mask of 255.255.255.192. Which Command Line Interface (CLI) command should the engineer use?
A. config bootconfig set ip 172.25.10.36/26
B. config bootconfig set ip 172.25.10.36/27
C. config bootconfig net mgmt ip 172.25.10.36/27
D. config bootconfig net mgmt ip 172.25.10.36/26
Answer: D
13. If you do not know the IP address of an Ethernet Routing Switch 5510, how can you upload code?
A. Use Telnet.
B. Use Console Access.
C. Use the Web browser.
D. Use the Java Device Manager.
Answer: B
14. You are using the Nortel Network Command Line Interface (NNCLI) to modify a VLAN or a port. Which NNCLI command mode are you using?
A. Global Configuration Mode
B. Interface Configuration Mode
C. Privileged EXEC Mode
D. Router Configuration Mode
Answer: B
Click Online chat to talk with us , get more informations about Nortel NCSS 920-221 practice exam study guides questions and answers
Test4pass 920-221 Exam Features
Quality and Value for the 920-221 Exam
Test4pass Practice Exams for Nortel 920-221 are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.
100% Guarantee to Pass Your 920-221 Exam
If you prepare for the exam using our Test4pass testing engine, we guarantee your success in the first attempt. If you do not pass the NCSS 920-221 exam (ProCurve Secure WAN) on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.
Nortel 920-221 Downloadable, Printable Exams (in PDF format)
Our Exam 920-221 Preparation Material provides you everything you will need to take your 920-221 Exam. The 920-221 Exam details are researched and produced by Professional Certification Experts who are constantly using industry experience to produce precise, and logical. You may get questions from different web sites or books, but logic is the key. Our Product will help you not only pass in the first try, but also save your valuable time.
920-221 Downloadable, Interactive Testing engines
We are all well aware that a major problem in the IT industry is that there is a lack of quality study materials. Our Exam Preparation Material provides you everything you will need to take a certification examination. Like actual certification exams, our Practice Tests are in multiple-choice (MCQs) Our Nortel 920-221 Exam will provide you with free 920-221 dumps questions with verified answers that reflect the actual exam. These questions and answers provide you with the experience of taking the actual test. High quality and Value for the 920-221 Exam:100% Guarantee to Pass Your NCSS exam and get your NCSS Certification.
Test4pass 920-221 examTest4pass 920-221 pdf exam
Test4pass 920-221 braindumps
Test4pass 920-221 study guides
Test4pass 920-221 trainning materials
Test4pass 920-221 simulations
Test4pass 920-221 testing engine
Test4pass 920-221 vce
Test4pass 920-221 torrent
Test4pass 920-221 dumps
free download 920-221
Test4pass 920-221 practice exam
Test4pass 920-221 preparation files
Test4pass 920-221 questions
Test4pass 920-221 answers
http://www.test4pass.com/920-221-exam.html The safer.easier way to get NCSS Certification
.
