74-134 Exam
Pre-Installing MS Products using the OEM Pre-Install Kit
- Exam Number/Code : 74-134
- Exam Name : Pre-Installing MS Products using the OEM Pre-Install Kit
- Questions and Answers : 50 Q&As
- Update Time: 2011-09-21
- Price:
$ 119.00$ 69.00
Free 74-134 Demo Download
Test4pass offers free demo for Microsoft Partner Competency 74-134 exam (Pre-Installing MS Products using the OEM Pre-Install Kit). You can check out the interface, question quality and usability of our practice exams before you decide to buy it. We are the only one site can offer demo for almost all products.
Exam Description
It is well known that 74-134 exam test is the hot exam of Microsoft certification. Test4pass offer you all the Q&A of the 74-134 real test . It is the examination of the perfect combination and it will help you pass 74-134 exam at the first time!
Why choose Test4pass 74-134 braindumps
Quality and Value for the 74-134 Exam
100% Guarantee to Pass Your 74-134 Exam
Downloadable, Interactive 74-134 Testing engines
Verified Answers Researched by Industry Experts
Drag and Drop questions as experienced in the Actual Exams
Practice Test Questions accompanied by exhibits
Our Practice Test Questions are backed by our 100% MONEY BACK GUARANTEE.
Microsoft Microsoft Partner Competency 74-134 exam braindumps questions and answers
¡¡
¡¡
Exam : Microsoft 74-134
Title : Pre-Installing MS Products using the OEM Pre-Install Kit
1. You are a system builder.
Your network uses a four-port router that is running the Dynamic Host Configuration Protocol (DHCP) service. Your technician computer is attached to the four-port router.
You have preinstalled a Microsoft Windows? operating system and included additional applications to be preinstalled along with the operating system.
Upon auditing the computer, you find that none of your additional applications have been preinstalled correctly.
What should you do? (Each correct answer presents part of the solution. Choose three.)
A. Run sysprep.exe with the Don??t regenerate Security Identifiers parameter to reinstall the applications.
B. Verify that the account listed in the winbom.ini file has the correct permissions to access files on the technician computer.
C. Check the contents of the winbom.log file to see if there are any error codes listed.
D. Run sysprep.exe with the audit parameter to reinstall the applications.
E. Check the contents of the setuperr.log file to see if there are any error codes listed.
F. Verify that the network is functional and that the master computer has a valid Internet Protocol (IP) address.
Answer: BCF
2. You are a system builder.
Your network is using a four-port router running Dynamic Host Configuration Protocol (DHCP). Your technician computer is running Microsoft Windows? 2000 Professional and is connected to the four-port router.
You have created a configuration set by using the OPKTools specified for use in preinstalling Microsoft Windows on three computers. You have the Microsoft Windows Preinstallation Environment CD from a three-pack of CDs for Microsoft Windows XP Professional. You start the Windows Preinstallation Environment CD on one of the computers and find that Windows Setup stops. You receive an error message stating that your Product Key is missing or invalid.
You need to perform an unattended installation of Windows without producing this error.
What should you do? (Each correct answer presents part of the solution. Choose two).
A. Verify that a Product Key is included in the oobeinfo.ini answer file.
B. Verify that a Product Key is included in the unattend.txt answer file.
C. Verify that the Product Key in the oobeinfo.ini answer file matches the SKU that is being installed.
D. Verify that the Product Key in the sysprep.inf answer file matches the SKU that is being installed.
E. Verify that a Product Key is included in the sysprep.inf answer file.
F. Verify that the Product Key in the unattend.txt answer file matches the SKU that is being installed.
Answer: BF
3. You are a system builder.
Your network is using a four-port router that is running Dynamic Host Configuration Protocol (DHCP). Your technician computer runs Microsoft Windows? 2000 Professional and is connected to the four-port router. You have created a configuration set by using OPKTools.
When you attempt the preinstallation on a new computer, you find that the hard drive is not formatted correctly. You open the winbom.ini answer file in the configuration set, and you see the following:
[Disk1.config]
Size1 = *
PartitionType1 = PRIMARY
FileSystem1 = NTFS
QuickFormat1 = YES
You need to perform an unattended preinstallation of Microsoft Windows on three new computers that you are shipping to customers.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Add Wipe Disk=Yes to the winbom.ini answer file.
B. Add SetActive1=Yes to the winbom.ini answer file.
C. Change Size1=* to Size1=10000 in the winbom.ini answer file.
D. Change QuickFormat1=YES to QuickFormat1=NO in the winbom.ini answer file.
Answer: AB
4. You are a system builder.
Your network uses a Microsoft Windows Server? 2003 that is running the Dynamic Host Configuration Protocol (DHCP) service and is set up as a technician computer. You installed OPKTools from Microsoft Windows? XP Service Pack 2.
You want to set a static Internet Protocol (IP) address for the Microsoft Windows Preinstallation Environment on the computer that you are installing for your customer. During the preinstallation process, you receive the following error message: Cannot Authenticate to Server.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Edit the winbom.ini file in the WinPE.net section to include the Gateway= parameter.
B. Edit the winbom.ini file in the WinPE.net section to include the StartNet= parameter.
C. Edit the winbom.ini file in the WinPE.net section to include WinPEFirewall=On.
D. Edit the winbom.ini file in the WinPE.net section to include the IPConfig= parameter.
Answer: AD
5. You are a system builder.
You have a four-port router that is running the Dynamic Host Configuration Protocol (DHCP) service. You are using a computer running Microsoft Windows? 2000 Professional as your technician computer.
You have created a configuration set and are using the following winbom.ini file to install the network drivers:
[PnpDrivers]
| \opktoolsdriversChipset = Chipset
| \opktoolsdriversvideo = video
| \opktoolsdriversAudio = Audio
| \opktoolsdriversModem = Modem
| Username = opk
| Password =
| [PnpDriverUpdate]
| WaitForPNP = YES
| TargetRoot = WindowsOEMdrivers
| UpdateInstalledDrivers = No
When you run the preinstallation, your updated drivers are not installed.
You need to install updated drivers.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Include the OEMPnPDriversPath parameter in the PnPDriverUpdate section of the winbom.ini file.
B. Remove the username and password parameters in the PnPDrivers section. Place them in the PnPDriverUpdate section.
C. Change the WaitForPnP=Yes parameter to WaitForPnP=No.
D. Remove lines in PnPDrivers section to only include \opktoolsdrivers = drivers.
E. In the PnPDrivers section,change UpdateInstalledDrivers=No to UpdateInstalledDrivers=Yes.
Answer: BE
6. You are a system builder.
Your network uses a Microsoft Windows Server? 2003 that is running the Dynamic Host Configuration Protocol (DHCP) service and is set up as a technician computer.
You installed OPKTools from Microsoft Windows? XP Service Pack 2. You run Setup Manager and create a configuration set to install a Microsoft Windows operating system.
You edit the winbom.ini file in the configuration set and copy the winbom.ini file to a floppy disk. You boot the master computer by using your Microsoft Windows Preinstallation Environment CD, and you insert the floppy disk with the winbom.ini file.
You get the following error message: Cannot Authenticate to the Server.
What should you do? (Each correct answer presents a complete solution. Choose two.)
A. Verify that the passwords used for connecting are the same in the configuration set and on the floppy disk.
B. Verify that the Gateway= parameter is included in the winbom.ini answer file.
C. Verify that the StartNet=yes parameter is included in the unattend.txt answer file.
D. Verify that the network interface card in the master computer is plugged in to the crossover cable.
Answer: AB
7. You are a system builder.
Your network includes a technician computer running Microsoft Windows Server? 2003 and the Dynamic Host Configuration Protocol (DHCP) service.
You have preinstalled two server computers by using the same configuration set. You have audited the two computers, and you are ready to reseal them.
You need to specify the computer name and the domain name for these two computers.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Create an oobeinfo.ini file and add Product= in the ICW section.
B. Create an oobeinfo.ini file and specify JoinDomain=1 in Options section.
C. Create a sysprep.inf file and specify the domain name in the JoinDomain parameter of the Identification section.
D. Create a sysprep.inf file and specify the computer name in the ComputerName parameter of the UserData section.
Answer: CD
8. You are a system builder.
Your network is using a four-port router that runs Dynamic Host Configuration Protocol (DHCP) service. Your technician computer runs Microsoft Windows? XP Professional and is connected to the four-port router.
You have created a configuration set to preinstall Microsoft Windows on two computers. You begin the preinstallation by using a winbom.ini answer file and a Windows Preinstallation Environment CD. One of the computers is preinstalled, but the other computer stops at the D:i386System32 directory. You troubleshoot and validate that Transmission Control Protocol/Internet Protocol (TCP/IP) is bound to the network interface card.
You need to preinstall the computer.
What additional steps should you take to troubleshoot the failure in the preinstallation process? (Each correct answer presents a complete solution. Choose five.)
A. Make sure that the network cable is working properly.
B. Make sure that the technician computer is not connected to a domain.
C. Make sure that the computer is connected to the network.
D. Make sure that the technician computer is connected to a domain.
E. Make sure that the master computer is connected to the same workgroup as the technician computer.
F. Make sure that the technician computer is configured properly by pinging the Internet Protocol (IP) address of the computer.
G. Make sure that the Universal Naming Convention (UNC) path in the winbom.ini file is correct.
H. Make sure that you are running up-to-date network drivers on the technician computer.
I. Make sure the user account inthe winbom.ini file has access to the distribution folder.
Answer: ACFGI
9. You are a system builder.
Your network is using a four-port router that is running the Dynamic Host Configuration Protocol (DHCP) service. Your technician computer runs Microsoft Windows? 2000 Professional and is connected to the four-port router.
You have installed a media reader card in a computer, and you use OPKTools to preinstall this computer over the network. In Audit mode you discover that the media card reader device has failed and that it is not enumerated in Device Manager.
You need to preinstall your computers with this card reader.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Add the DriverSigningPolicy=Ignore parameter in the Unattended section of the unattend.txt answer file to preinstall the unsigned driver.
B. Remove the incorrect driver that was installed.
C. Add the DriverSigningPolicy=Warn parameter in the Unattended section of the unattend.txt answer file.
D. Obtain an updated driver (if one exists) from the manufacturer.
E. Run sigverif.exe from a command prompt to verify that all the drivers are signed.
F. Add the DriverSigningPolicy=Block parameter in the Unattended section of the unattend.txt answer file.
Answer: AD
10. You are a system builder.
The company network is not functional, and there is no network access to the technician computer. You need to preinstall Microsoft Windows? operating systems on three computers. You have three copies of the Windows operating systems.
You have decided to use a winnt.sif file to perform a Windows CD-based preinstallation on these computers. You manually create a winnt.sif file and copy it to three floppy disks. You place a CD of each Windows operating system in the DVD drive of each computer. You start each computer.
When you see the initialization screen on each computer, you insert the floppy disk with the winnt.sif file on it into each computer. Two of the computers are preinstalled properly. The third computer, however, begins the preinstallation process but stops with the command prompt window open and the cursor at D:i386System32.
You need to preinstall the third computer.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Remove the CD from the drive, clean it, and begin the process again.
B. Check the Hardware Compatibility list to make sure that all hardware is compliant.
C. At the command prompt, type ipconfig /all to make sure that Transmission Control Protocol/Internet Protocol (TCP/IP) is bound to the adapter.
D. Remove the Microsoft Windows OEM Preinstallation Kit (OPK) CD from the DVD drive and place the Windows operating system CD into the DVD drive.
Answer: BD
11. You are a system builder.
Your network has Microsoft Windows Server? 2003 on a computer running the Dynamic Host Configuration Protocol (DHCP) service. You want to install the OPKTools on this computer to make it a technician computer. You insert the Microsoft Windows? OEM Preinstallation Kit CD into the drive.
You need to ensure that the fundamental tools are installed properly.
What should you do? (Each correct answer presents part of the solution. Choose all that apply.)
A. Make sure that sysprep.exe is in the Toolsx86 folder.
B. Make sure that setupmgr.exe is in the root folder.
C. Make sure that oformat.exe is in the root folder.
D. Make sure that setupcl.exe is in the Toolsx86 folder.
E. Make sure that there are files in the Winpe folder.
F. Make sure that factory.exe is in the Toolsx86 folder.
G. Make sure that the diskpart utilities are in the root folder.
Answer: ABDEF
12. You are a system builder.
Your network uses a Microsoft Windows Server? 2003 computer that is running the Dynamic Host Configuration Protocol (DHCP) service.
You create a configuration set for a Microsoft Windows Small Business Server 2003 installation and preinstall a computer for your customer. You create the directory Sysprep and copy all the necessary files into this folder. You then run sysprep on the computer by using the following command: C:SysprepSysprep.exe -dc ????¡§??Creseal.
You reboot the computer and receive the following error: LSASS.EXE - System Error.
What should you do?
A. Use the OEM version of Windows Small Business Server 2003.
B. Use the MSDN version of Windows Small Business Server 2003.
C. Use an open-license version of Windows Small Business Server 2003.
D. Use the Retail version of Windows Small Business Server 2003.
Answer: A
13. You are a system builder.
Your network is using a four-port router that runs Dynamic Host Configuration Protocol (DHCP). Your technician computer runs Microsoft Windows? 2000 Professional and is connected to the four-port router. You have created a configuration set.
You preinstall a Microsoft Windows operating system by using this configuration set. When you check the event viewer to note any problems, you find that the event viewer is empty.
You need to review the event viewer logs during Audit mode.
What should you do? (Each correct answer represents a partial solution. Choose two.)
A. Preinstall the computer and view the event logs after running sysprep.exe.
B. Preinstall the computer and audit the computer before running sysprep.exe.
C. In Setup Manager, on the Type of Installation page, choose Don??t Reseal When Finished.
D. In Setup Manager, on the Type of Installation page, choose Copy Files Only.
Answer: BC
14. You are a system builder.
Your network includes a technician computer running Windows Server? 2003 and the Dynamic Host Configuration Protocol (DHCP) service. You installed OPKTools from Microsoft Windows? XP Service Pack 2. You have created configuration sets for various Microsoft Windows operating systems, and you have preinstalled Windows on computers.
You receive an order to install a Windows operating system for which you have not created a configuration set.
You need to add this operating system to OPKTools.
What should you do? (Each correct answer presents a complete solution. Choose two.)
A. Boot the computer with the new operating system.
B. Use Setup Manager to create a new configuration set and add the new operating system.
C. Use Setup Manager to create a winnt.sif answer file to preinstall the operating system.
D. Use Setup Manager to manage products and add the new operating system.
Answer: BD
Click Online chat to talk with us , get more informations about Microsoft Microsoft Partner Competency 74-134 practice exam study guides questions and answers
¡¡
Exam : Microsoft 74-134
Title : Pre-Installing MS Products using the OEM Pre-Install Kit
1. You are a system builder.
Your network uses a four-port router that is running the Dynamic Host Configuration Protocol (DHCP) service. Your technician computer is attached to the four-port router.
You have preinstalled a Microsoft Windows? operating system and included additional applications to be preinstalled along with the operating system.
Upon auditing the computer, you find that none of your additional applications have been preinstalled correctly.
What should you do? (Each correct answer presents part of the solution. Choose three.)
A. Run sysprep.exe with the Don??t regenerate Security Identifiers parameter to reinstall the applications.
B. Verify that the account listed in the winbom.ini file has the correct permissions to access files on the technician computer.
C. Check the contents of the winbom.log file to see if there are any error codes listed.
D. Run sysprep.exe with the audit parameter to reinstall the applications.
E. Check the contents of the setuperr.log file to see if there are any error codes listed.
F. Verify that the network is functional and that the master computer has a valid Internet Protocol (IP) address.
Answer: BCF
2. You are a system builder.
Your network is using a four-port router running Dynamic Host Configuration Protocol (DHCP). Your technician computer is running Microsoft Windows? 2000 Professional and is connected to the four-port router.
You have created a configuration set by using the OPKTools specified for use in preinstalling Microsoft Windows on three computers. You have the Microsoft Windows Preinstallation Environment CD from a three-pack of CDs for Microsoft Windows XP Professional. You start the Windows Preinstallation Environment CD on one of the computers and find that Windows Setup stops. You receive an error message stating that your Product Key is missing or invalid.
You need to perform an unattended installation of Windows without producing this error.
What should you do? (Each correct answer presents part of the solution. Choose two).
A. Verify that a Product Key is included in the oobeinfo.ini answer file.
B. Verify that a Product Key is included in the unattend.txt answer file.
C. Verify that the Product Key in the oobeinfo.ini answer file matches the SKU that is being installed.
D. Verify that the Product Key in the sysprep.inf answer file matches the SKU that is being installed.
E. Verify that a Product Key is included in the sysprep.inf answer file.
F. Verify that the Product Key in the unattend.txt answer file matches the SKU that is being installed.
Answer: BF
3. You are a system builder.
Your network is using a four-port router that is running Dynamic Host Configuration Protocol (DHCP). Your technician computer runs Microsoft Windows? 2000 Professional and is connected to the four-port router. You have created a configuration set by using OPKTools.
When you attempt the preinstallation on a new computer, you find that the hard drive is not formatted correctly. You open the winbom.ini answer file in the configuration set, and you see the following:
[Disk1.config]
Size1 = *
PartitionType1 = PRIMARY
FileSystem1 = NTFS
QuickFormat1 = YES
You need to perform an unattended preinstallation of Microsoft Windows on three new computers that you are shipping to customers.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Add Wipe Disk=Yes to the winbom.ini answer file.
B. Add SetActive1=Yes to the winbom.ini answer file.
C. Change Size1=* to Size1=10000 in the winbom.ini answer file.
D. Change QuickFormat1=YES to QuickFormat1=NO in the winbom.ini answer file.
Answer: AB
4. You are a system builder.
Your network uses a Microsoft Windows Server? 2003 that is running the Dynamic Host Configuration Protocol (DHCP) service and is set up as a technician computer. You installed OPKTools from Microsoft Windows? XP Service Pack 2.
You want to set a static Internet Protocol (IP) address for the Microsoft Windows Preinstallation Environment on the computer that you are installing for your customer. During the preinstallation process, you receive the following error message: Cannot Authenticate to Server.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Edit the winbom.ini file in the WinPE.net section to include the Gateway= parameter.
B. Edit the winbom.ini file in the WinPE.net section to include the StartNet= parameter.
C. Edit the winbom.ini file in the WinPE.net section to include WinPEFirewall=On.
D. Edit the winbom.ini file in the WinPE.net section to include the IPConfig= parameter.
Answer: AD
5. You are a system builder.
You have a four-port router that is running the Dynamic Host Configuration Protocol (DHCP) service. You are using a computer running Microsoft Windows? 2000 Professional as your technician computer.
You have created a configuration set and are using the following winbom.ini file to install the network drivers:
[PnpDrivers]
| \opktoolsdriversChipset = Chipset
| \opktoolsdriversvideo = video
| \opktoolsdriversAudio = Audio
| \opktoolsdriversModem = Modem
| Username = opk
| Password =
| [PnpDriverUpdate]
| WaitForPNP = YES
| TargetRoot = WindowsOEMdrivers
| UpdateInstalledDrivers = No
When you run the preinstallation, your updated drivers are not installed.
You need to install updated drivers.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Include the OEMPnPDriversPath parameter in the PnPDriverUpdate section of the winbom.ini file.
B. Remove the username and password parameters in the PnPDrivers section. Place them in the PnPDriverUpdate section.
C. Change the WaitForPnP=Yes parameter to WaitForPnP=No.
D. Remove lines in PnPDrivers section to only include \opktoolsdrivers = drivers.
E. In the PnPDrivers section,change UpdateInstalledDrivers=No to UpdateInstalledDrivers=Yes.
Answer: BE
6. You are a system builder.
Your network uses a Microsoft Windows Server? 2003 that is running the Dynamic Host Configuration Protocol (DHCP) service and is set up as a technician computer.
You installed OPKTools from Microsoft Windows? XP Service Pack 2. You run Setup Manager and create a configuration set to install a Microsoft Windows operating system.
You edit the winbom.ini file in the configuration set and copy the winbom.ini file to a floppy disk. You boot the master computer by using your Microsoft Windows Preinstallation Environment CD, and you insert the floppy disk with the winbom.ini file.
You get the following error message: Cannot Authenticate to the Server.
What should you do? (Each correct answer presents a complete solution. Choose two.)
A. Verify that the passwords used for connecting are the same in the configuration set and on the floppy disk.
B. Verify that the Gateway= parameter is included in the winbom.ini answer file.
C. Verify that the StartNet=yes parameter is included in the unattend.txt answer file.
D. Verify that the network interface card in the master computer is plugged in to the crossover cable.
Answer: AB
7. You are a system builder.
Your network includes a technician computer running Microsoft Windows Server? 2003 and the Dynamic Host Configuration Protocol (DHCP) service.
You have preinstalled two server computers by using the same configuration set. You have audited the two computers, and you are ready to reseal them.
You need to specify the computer name and the domain name for these two computers.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Create an oobeinfo.ini file and add Product= in the ICW section.
B. Create an oobeinfo.ini file and specify JoinDomain=1 in Options section.
C. Create a sysprep.inf file and specify the domain name in the JoinDomain parameter of the Identification section.
D. Create a sysprep.inf file and specify the computer name in the ComputerName parameter of the UserData section.
Answer: CD
8. You are a system builder.
Your network is using a four-port router that runs Dynamic Host Configuration Protocol (DHCP) service. Your technician computer runs Microsoft Windows? XP Professional and is connected to the four-port router.
You have created a configuration set to preinstall Microsoft Windows on two computers. You begin the preinstallation by using a winbom.ini answer file and a Windows Preinstallation Environment CD. One of the computers is preinstalled, but the other computer stops at the D:i386System32 directory. You troubleshoot and validate that Transmission Control Protocol/Internet Protocol (TCP/IP) is bound to the network interface card.
You need to preinstall the computer.
What additional steps should you take to troubleshoot the failure in the preinstallation process? (Each correct answer presents a complete solution. Choose five.)
A. Make sure that the network cable is working properly.
B. Make sure that the technician computer is not connected to a domain.
C. Make sure that the computer is connected to the network.
D. Make sure that the technician computer is connected to a domain.
E. Make sure that the master computer is connected to the same workgroup as the technician computer.
F. Make sure that the technician computer is configured properly by pinging the Internet Protocol (IP) address of the computer.
G. Make sure that the Universal Naming Convention (UNC) path in the winbom.ini file is correct.
H. Make sure that you are running up-to-date network drivers on the technician computer.
I. Make sure the user account inthe winbom.ini file has access to the distribution folder.
Answer: ACFGI
9. You are a system builder.
Your network is using a four-port router that is running the Dynamic Host Configuration Protocol (DHCP) service. Your technician computer runs Microsoft Windows? 2000 Professional and is connected to the four-port router.
You have installed a media reader card in a computer, and you use OPKTools to preinstall this computer over the network. In Audit mode you discover that the media card reader device has failed and that it is not enumerated in Device Manager.
You need to preinstall your computers with this card reader.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Add the DriverSigningPolicy=Ignore parameter in the Unattended section of the unattend.txt answer file to preinstall the unsigned driver.
B. Remove the incorrect driver that was installed.
C. Add the DriverSigningPolicy=Warn parameter in the Unattended section of the unattend.txt answer file.
D. Obtain an updated driver (if one exists) from the manufacturer.
E. Run sigverif.exe from a command prompt to verify that all the drivers are signed.
F. Add the DriverSigningPolicy=Block parameter in the Unattended section of the unattend.txt answer file.
Answer: AD
10. You are a system builder.
The company network is not functional, and there is no network access to the technician computer. You need to preinstall Microsoft Windows? operating systems on three computers. You have three copies of the Windows operating systems.
You have decided to use a winnt.sif file to perform a Windows CD-based preinstallation on these computers. You manually create a winnt.sif file and copy it to three floppy disks. You place a CD of each Windows operating system in the DVD drive of each computer. You start each computer.
When you see the initialization screen on each computer, you insert the floppy disk with the winnt.sif file on it into each computer. Two of the computers are preinstalled properly. The third computer, however, begins the preinstallation process but stops with the command prompt window open and the cursor at D:i386System32.
You need to preinstall the third computer.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Remove the CD from the drive, clean it, and begin the process again.
B. Check the Hardware Compatibility list to make sure that all hardware is compliant.
C. At the command prompt, type ipconfig /all to make sure that Transmission Control Protocol/Internet Protocol (TCP/IP) is bound to the adapter.
D. Remove the Microsoft Windows OEM Preinstallation Kit (OPK) CD from the DVD drive and place the Windows operating system CD into the DVD drive.
Answer: BD
11. You are a system builder.
Your network has Microsoft Windows Server? 2003 on a computer running the Dynamic Host Configuration Protocol (DHCP) service. You want to install the OPKTools on this computer to make it a technician computer. You insert the Microsoft Windows? OEM Preinstallation Kit CD into the drive.
You need to ensure that the fundamental tools are installed properly.
What should you do? (Each correct answer presents part of the solution. Choose all that apply.)
A. Make sure that sysprep.exe is in the Toolsx86 folder.
B. Make sure that setupmgr.exe is in the root folder.
C. Make sure that oformat.exe is in the root folder.
D. Make sure that setupcl.exe is in the Toolsx86 folder.
E. Make sure that there are files in the Winpe folder.
F. Make sure that factory.exe is in the Toolsx86 folder.
G. Make sure that the diskpart utilities are in the root folder.
Answer: ABDEF
12. You are a system builder.
Your network uses a Microsoft Windows Server? 2003 computer that is running the Dynamic Host Configuration Protocol (DHCP) service.
You create a configuration set for a Microsoft Windows Small Business Server 2003 installation and preinstall a computer for your customer. You create the directory Sysprep and copy all the necessary files into this folder. You then run sysprep on the computer by using the following command: C:SysprepSysprep.exe -dc ????¡§??Creseal.
You reboot the computer and receive the following error: LSASS.EXE - System Error.
What should you do?
A. Use the OEM version of Windows Small Business Server 2003.
B. Use the MSDN version of Windows Small Business Server 2003.
C. Use an open-license version of Windows Small Business Server 2003.
D. Use the Retail version of Windows Small Business Server 2003.
Answer: A
13. You are a system builder.
Your network is using a four-port router that runs Dynamic Host Configuration Protocol (DHCP). Your technician computer runs Microsoft Windows? 2000 Professional and is connected to the four-port router. You have created a configuration set.
You preinstall a Microsoft Windows operating system by using this configuration set. When you check the event viewer to note any problems, you find that the event viewer is empty.
You need to review the event viewer logs during Audit mode.
What should you do? (Each correct answer represents a partial solution. Choose two.)
A. Preinstall the computer and view the event logs after running sysprep.exe.
B. Preinstall the computer and audit the computer before running sysprep.exe.
C. In Setup Manager, on the Type of Installation page, choose Don??t Reseal When Finished.
D. In Setup Manager, on the Type of Installation page, choose Copy Files Only.
Answer: BC
14. You are a system builder.
Your network includes a technician computer running Windows Server? 2003 and the Dynamic Host Configuration Protocol (DHCP) service. You installed OPKTools from Microsoft Windows? XP Service Pack 2. You have created configuration sets for various Microsoft Windows operating systems, and you have preinstalled Windows on computers.
You receive an order to install a Windows operating system for which you have not created a configuration set.
You need to add this operating system to OPKTools.
What should you do? (Each correct answer presents a complete solution. Choose two.)
A. Boot the computer with the new operating system.
B. Use Setup Manager to create a new configuration set and add the new operating system.
C. Use Setup Manager to create a winnt.sif answer file to preinstall the operating system.
D. Use Setup Manager to manage products and add the new operating system.
Answer: BD
Click Online chat to talk with us , get more informations about Microsoft Microsoft Partner Competency 74-134 practice exam study guides questions and answers
Test4pass 74-134 Exam Features
Quality and Value for the 74-134 Exam
Test4pass Practice Exams for Microsoft 74-134 are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.
100% Guarantee to Pass Your 74-134 Exam
If you prepare for the exam using our Test4pass testing engine, we guarantee your success in the first attempt. If you do not pass the Microsoft Partner Competency 74-134 exam (ProCurve Secure WAN) on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.
Microsoft 74-134 Downloadable, Printable Exams (in PDF format)
Our Exam 74-134 Preparation Material provides you everything you will need to take your 74-134 Exam. The 74-134 Exam details are researched and produced by Professional Certification Experts who are constantly using industry experience to produce precise, and logical. You may get questions from different web sites or books, but logic is the key. Our Product will help you not only pass in the first try, but also save your valuable time.
74-134 Downloadable, Interactive Testing engines
We are all well aware that a major problem in the IT industry is that there is a lack of quality study materials. Our Exam Preparation Material provides you everything you will need to take a certification examination. Like actual certification exams, our Practice Tests are in multiple-choice (MCQs) Our Microsoft 74-134 Exam will provide you with free 74-134 dumps questions with verified answers that reflect the actual exam. These questions and answers provide you with the experience of taking the actual test. High quality and Value for the 74-134 Exam:100% Guarantee to Pass Your Microsoft Partner Competency exam and get your Microsoft Partner Competency Certification.
Test4pass 74-134 examTest4pass 74-134 pdf exam
Test4pass 74-134 braindumps
Test4pass 74-134 study guides
Test4pass 74-134 trainning materials
Test4pass 74-134 simulations
Test4pass 74-134 testing engine
Test4pass 74-134 vce
Test4pass 74-134 torrent
Test4pass 74-134 dumps
free download 74-134
Test4pass 74-134 practice exam
Test4pass 74-134 preparation files
Test4pass 74-134 questions
Test4pass 74-134 answers
http://www.test4pass.com/74-134-exam.html The safer.easier way to get Microsoft Partner Competency Certification
.
My Shopping Cart
