Home > Microsoft > TS > 70-652

70-652 Exam

TS: Windows Server Virtualization, Configuring

Exam Number/Code : 70-652
Exam Name : TS: Windows Server Virtualization, Configuring
Questions and Answers : 47 Q&As
Update Time: 2013-04-05
Price: ~~$ 119.00~~ $ 69.00
70-652 Hard Copy (PDF)
70-652 Test Engine

70-652

Free 70-652 Demo Download

Test4pass offers free demo for TS 70-652 exam (TS: Windows Server Virtualization, Configuring). You can check out the interface, question quality and usability of our practice exams before you decide to buy it. We are the only one site can offer demo for almost all products.

Exam Description

It is well known that 70-652 exam test is the hot exam of Microsoft certification. Test4pass offer you all the Q&A of the 70-652 real test . It is the examination of the perfect combination and it will help you pass 70-652 exam at the first time!

Why choose Test4pass 70-652 braindumps

Quality and Value for the 70-652 Exam
100% Guarantee to Pass Your 70-652 Exam
Downloadable, Interactive 70-652 Testing engines
Verified Answers Researched by Industry Experts
Drag and Drop questions as experienced in the Actual Exams
Practice Test Questions accompanied by exhibits
Our Practice Test Questions are backed by our 100% MONEY BACK GUARANTEE.

Test4pass 70-652 Exam Features

Quality and Value for the 70-652 Exam

Test4pass Practice Exams for Microsoft 70-652 are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.

100% Guarantee to Pass Your 70-652 Exam

If you prepare for the exam using our Test4pass testing engine, we guarantee your success in the first attempt. If you do not pass the TS 70-652 exam (ProCurve Secure WAN) on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.

Microsoft 70-652 Downloadable, Printable Exams (in PDF format)

Our Exam 70-652 Preparation Material provides you everything you will need to take your 70-652 Exam. The 70-652 Exam details are researched and produced by Professional Certification Experts who are constantly using industry experience to produce precise, and logical. You may get questions from different web sites or books, but logic is the key. Our Product will help you not only pass in the first try, but also save your valuable time.

70-652 Downloadable, Interactive Testing engines

We are all well aware that a major problem in the IT industry is that there is a lack of quality study materials. Our Exam Preparation Material provides you everything you will need to take a certification examination. Like actual certification exams, our Practice Tests are in multiple-choice (MCQs) Our Microsoft 70-652 Exam will provide you with free 70-652 dumps questions with verified answers that reflect the actual exam. These questions and answers provide you with the experience of taking the actual test. High quality and Value for the 70-652 Exam:100% Guarantee to Pass Your TS exam and get your TS Certification.

Hot KeyWords On 70-652 test

How to pass your 70-652 exam

You can search on Search Engine and Find Best IT Certification site: Test4pass.com - Find the Method to succeed 70-652 test,The safer.easier way to get TS Certification .

Microsoft 70-652 Exam Offical Information

Test4pass 70 652 Braindumps Download

View more documents from test4pass

��
��
Exam : Microsoft 70-652
Title : TS: Windows Server Virtualization, Configuring

1. You have a server that runs Windows Server 2008. The server is a member of a workgroup and has the following components installed:
��Microsoft SQL Server 2005 Express Edition Service Pack (SP2)
��Web Server (IIS) server role
��IIS 6 Metabase Compatibility role service
��IIS 6 WMI Compatibility role service
You attempt to install Microsoft System Center Virtual Machine Manager (SCVMM) 2008 on the server. The installation fails.
You need to ensure that you can install SCVMM on the server.
What should you do?
A. Disable User Account Control (UAC) on the server.
B. Remove the IIS 6 Metabase Compatibility role service.
C. Replace SQL Server 2005 Express Edition with a different edition.
D. Join the Windows Server 2008 server to an Active Directory domain.
Answer: D

2. Your network contains a server that runs Windows Server 200 The server has the Hyper-V server role installed.
You need to ensure that a user named User1 can remotely connect to the Hyper-V server by using Hyper-V Manager.
What should you modify?
A. the members of the local Server Operators group
B. the NTFS permissions of the InitialStore.xml file
C. the Role Assignments in Authorization Manager
D. the Role Definitions in Authorization Manager
Answer: C

3. Your network contains 4 servers as shown in the following table.
You need to install Windows Server 2008 and enable the Hyper-V server role on a server in your network.
Which server should you use?
A. Server1
B. Server2
C. Server3
D. Server4
Answer: A

4. You have a server that runs Windows Server 2008. The server has the Hyper-V server role installed and the following configurations:
Physical hardware configuration
��Dual core processor
��20-GB RAM
��Single port network card
��Two SATA hard disks for the operating system (drive C) in a RAID 1 configuration
��Four SATA hard disks for the virtual machine storage (drive D) in a RAID 10 configuration
Virtual machine configurations
��Two virtual machines that each run at 10 percent CPU utilization
��Each virtual machine uses 8 GB of RAM
Administrators report slow response times when they use Hyper-V Manager to establish remote connections to the Hyper-V server.
You need to improve response times when administrators use Hyper-V Manager.
What should you do?
A. Increase the RAM.
B. Add a second processor.
C. Add a second network card.
D. Change the SATA drives to iSCSI drives.
Answer: c

5. You install the Hyper-V server role on a Windows Server 2008 server.
You restart the server and discover that the Hyper-V Virtual Machine Management service has failed to start. You restart the server again and enable the required BIOS settings for Hyper-V.
After a third restart, the Hyper-V Virtual Machine Management service still fails to start.
You need to ensure that the Hyper-V Virtual Machine Management service starts on the server.
What should you do?
A. Shut down the server, turn off the power, and then turn on the server.
B. Run the ocsetup Microsoft-Hyper-V command and restart the server.
C. Run the oclist | findstr /i Microsoft-Hyper-V command and restart the server.
D. Open the Services console and modify the Log on as settings for the Hyper-V Virtual Machine Management service. Start the service.
Answer: A

6. You have two servers that run Windows Server 2008. The servers have the Hyper-V server role installed and are configured as shown in the following table.
You successfully run the Failover Clustering Validation Wizard and create a new failover cluster.
You create a new virtual machine on one of the host servers. You attempt to make the virtual machine highly available and receive an error message stating that the disk path is either unavailable, inaccessible, or cannot be managed by the cluster.
You need ensure that the virtual machine is highly available.
What should you do first?
A. Move the virtual machine XML configuration file to volume E.
B. Replace the fibre channel connection for volume E with an iSCSI connection.
C. On each server, add and configure a second physical disk. Store the virtual machine on the added disk.
D. On each server, add and configure a second fibre channel connection to a second SAN disk. Store the virtual machine on the added disk.
Answer: D

7. You evaluate the purchase of a new server for the network.
A hardware supplier recommends a server that has the following hardware configuration:
��Dual-core 32-bit processor
��4 GB of RAM
��One single-port network card
��Two SATA hard disks
You need to change the hardware configuration to ensure that you can install the Hyper-V server role.
Which hardware component should you replace?
A. hard disks
B. memory
C. network card
D. processor
Answer: D

8. You install the Hyper-V server role on a server that runs Windows Server 2008. The disk is configured as shown in the following diagram.
You attempt to create a pass-through disk from Hyper-V Manager. You notice that the physical hard disk option is unavailable.
You need to ensure that you can add a pass-through disk to a virtual machine.
What should you do?
A. Mark Disk 1 as offline.
B. Create a volume mount point on drive C.
C. Add an additional hard disk drive to the server.
D. Create a new simple volume on Disk 1 and format the volume.
Answer: A

9. You need to enable the Hyper-V server role on a Server Core installation of Windows Server 2008.
Which command should you run?
A. cscript scregedit.wsf /AR 0
B. start /w ocsetup Microsoft-Hyper-V
C. start /w servermanagercmd -install Microsoft-Hyper-V
D. winrm quickconfig
Answer: B

10. Your network contains two servers named Server1 and Server2. The servers are configured as shown in the following table.
You need to ensure that you can run VM3 on Server2. The solution must meet the following requirements:
��VM3 must remain available on Server1.
��Virtual machine configurations must remain the same.
��Administrative effort must be minimized.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. From Hyper-V Manager on Server1, run the Export action for VM3.
B. From Hyper-V Manager on Server2, select the Import action for VM3.
C. Copy the VM3 Virtual Hard Disk (VHD) files to Server2.
D. Copy the VM3 XML configuration files to Server2. Double-click the XML configuration file.
Answer: AB