70-223 Exam
Configuring and Administering Microsoft Clustering Services by using Microsoft Windows 2000 Advanced
- Exam Number/Code : 70-223
- Exam Name : Configuring and Administering Microsoft Clustering Services by using Microsoft Windows 2000 Advanced
- Questions and Answers : 90 Q&As
- Update Time: 2011-09-21
- Price:
$ 119.00$ 69.00
Free 70-223 Demo Download
Test4pass offers free demo for MCSE 70-223 exam (Configuring and Administering Microsoft Clustering Services by using Microsoft Windows 2000 Advanced). You can check out the interface, question quality and usability of our practice exams before you decide to buy it. We are the only one site can offer demo for almost all products.
Exam Description
It is well known that 70-223 exam test is the hot exam of Microsoft certification. Test4pass offer you all the Q&A of the 70-223 real test . It is the examination of the perfect combination and it will help you pass 70-223 exam at the first time!
Why choose Test4pass 70-223 braindumps
Quality and Value for the 70-223 Exam
100% Guarantee to Pass Your 70-223 Exam
Downloadable, Interactive 70-223 Testing engines
Verified Answers Researched by Industry Experts
Drag and Drop questions as experienced in the Actual Exams
Practice Test Questions accompanied by exhibits
Our Practice Test Questions are backed by our 100% MONEY BACK GUARANTEE.
Microsoft MCSE 70-223 exam braindumps questions and answers
¡¡
¡¡
¡¡
Exam : Microsoft 70-223
Title : INST.CONF.&ADM MS CLUST SERV USING MS WIN2K ADV SERVER
1. You are the administrator of a two-node Windows 2000 Advanced Server cluster. The cluster is configured as shown in the following diagram.
Adapter 1A and Adapter 2A are designated for Client access only. Adapter 1B and Adapter 2B are designated for Internal cluster communications only.
Which network components represent a single point of failure for internal cluster communications? (Choose all that apply.)
A. Adapter 1A
B. Adapter 1B
C. Adapter 2A
D. Adapter 2B
E. the crossover cable
F. the stand-alone hub
Answer: BDE
2. You are the administrator of two new computers. You need to configure the computers before installing Windows 2000 Advanced Server and the Cluster service. You install a new SCSI controller in each computer. You connect both controllers to an external disk array, which will serve as the cluster storage. The external disk array contains three hard disks. You start both servers and receive a BIOS error message on each server. The error message indicates that a device conflict has been detected on the SCSI bus. You need to correct this error. What should you do?
A. Change the SCSI ID to 0 on all three hard disks.
B. Change the SCSI ID on one of the SCSI controllers.
C. Add a SCSI bus terminator to the connector on the external disk array.
D. Add a SCSI bus terminator to the connectors on both SCSI controllers.
Answer: B
3. You are the cluster administrator for your company. You need to configure two Windows 2000 Advanced Server computers for use as cluster nodes. You need to implement fault-tolerance methods for the local storage. You also need to implement fault-tolerance methods for the external storage subsystem.
Each server contains two 9.3-GB hard disks. The external storage subsystem contains eight 10-GB hard disks. You need to ensure that the cluster can tolerate the failure of a single hard disk in either server and in the external storage subsystem.
Which two fault-tolerance methods should you use? (Choose two.)
A. Configure the hard disks in each server as Windows 2000 striped volumes.
B. Configure the hard disks in each server as Windows 2000 RAID 5 volumes.
C. Configure the hard disks in each server as Windows 2000 mirrored volumes.
D. Configure the hard disks in the external storage subsystem to use a hardware RAID 5 array.
E. Configure the hard disks in the external storage subsystem as Windows 2000 striped volumes.
F. Configure the hard disks in the external storage subsystem as Windows 2000 RAID 5 volumes.
Answer: CD
4. You are the administrator of a Windows 2000 Advanced Server computer. You need to prepare the server for use as a cluster node. The server contains a SCSI controller and three internal 4.3-GB hard disks. You plan to attach the server to an external storage subsystem that contains eight 18.3-GB hard disks. You connect the three 4.3-GB hard disks to the SCSI controller's internal connector. Next, you connect the external storage subsystem to the SCSI controller's external connector. When you start the server, you receive numerous BIOS error messages that indicate errors on the SCSI bus. Before installing the Cluster service, you need to be able to access the internal and external disks that are attached to the server. What should you do?
A. Replace the SCSI controller.
B. Replace the external SCSI cable.
C. Set the SCSI ID to 6.
D. Install an additional SCSI controller in the server.
Connect the external drive array to the new controller's external connector.
E. Disable the on-board SCSI termination on the SCSI controller.
Connect a SCSI terminator to the SCSI-out connector on the external storage subsystem.
Answer: D
5. You are the administrator of a Windows 2000 Advanced Server cluster. You discover that the Quorum resource recovery log files on the cluster are corrupt. You need to restore the log files from a recent backup tape without overwriting other cluster data or system data. What should you do?
A. Perform a System State restore, and run the ntdsutil.exe command.
B. Restore the contents of the Quorum resource drive from the backup tape, and specify that the files be restored to their original location.
Use the Cluster Administrator to re-form the cluster.
C. Perform a System State restore, specifying an alternate location for the restore.
Copy the restored Quorum resource recovery files on the cluster to the quorum drive.
D. Use the Cluster Administrator to break the cluster.
Restore the contents of the Quorum resource drive from the backup tape, and specify that only the recovery log files be restored.
Use the Cluster Administrator to re-form the cluster.
Answer: C
6. You are the administrator of a Windows 2000 Advanced Server cluster named Cluster1. Cluster1 consists of two nodes that are designated NodeA and NodeB. Each node has 8 GB of local disk storage. The cluster storage is composed of eight 10-GB hard drives in a hardware RAID 5 array.
The local disk storage on both nodes consists of a single volume, which is shared as C$. The cluster storage is shared as Z$.
You need to implement a disaster recovery strategy that includes regular backups of the cluster. You decide to use Windows 2000 Backup.
You want to accomplish the following goals:
Perform a full daily backup of the cluster storage, even if one node in the cluster fails.
Perform a full daily backup of the System State data on the node that owns the Quorum resource.
Perform a full daily backup of the local disk storage on the node that owns the Quorum resource.
Save all of the backed-up data to a single tape.
You take the following actions:
Connect a 100-GB tape drive to NodeA.
Use Windows 2000 Backup to create a backup selection file that includes \Cluster1Z$ and \NodeAC$. Save the backup selection file in C:ClusterBack.bks on NodeA.
Use the Scheduler service on BackupSvr to launch Windows 2000 Backup daily. Use the following command line parameters: ntbackup backup systemstate c:clusterback.bks
Which result or results do these actions produce? (Choose all that apply.)
A. The cluster storage is fully backed up daily, even if one node in the cluster fails.
B. The System State data on the node that owns the Quorum resource is fully backed up daily.
C. The local disk storage on the node that owns the Quorum resource is fully backed up daily.
D. All of the backed-up data is saved to a single tape.
Answer: D
7. You are the administrator of a Windows 2000 Advanced Server cluster. The cluster consists of two nodes that are designated NodeA and NodeB. You configure several groups and resources, but you cannot bring any of the Network Name resources online. Windows 2000 is installed in the default location on both NodeA and NodeB, and the Quorum resource is located on logical drive Q in the default path. You attempt to view the log of cluster activity, but the log does not appear. You want to be able to review as much detail of the cluster activity as possible so that you can identify the problem. What should you do?
A. Increase the size of the quorum log.
B. Increase the size of the System event log.
C. Configure the Application event log to not overwrite events.
D. On both nodes, configure a system environment variable named ClusterLog with a value of C:winntclustercluster.log.
Answer: D
8. You are the administrator of a file cluster. The cluster consists of two nodes that are designated NodeA and NodeB. The cluster storage subsystem contains more than 1 TB of data. This data is accessed by more than 1,000 users daily. Each day, you process approximately 20 requests to create new shares in the cluster.
The systemroot folder on both nodes is configured as the default for Windows 2000. The cluster contains the default Cluster group, which contains the following resources:
Network Name = Cluster
IP Address = 192.168.5.101
Physical Disk = F
You want to ensure that the maximum time for loss of cluster configuration data is one hour.
What should you do?
A. Schedule an hourly backup of the system state data on each node.
B. Schedule an hourly backup of the C:winntCluster folder on each node.
C. Schedule an hourly backup of the HKEY_LOCAL_MACHINESystem registry key on both nodes.
D. In the Failover properties for the Cluster group, specify a Threshold of 1 and Period of 1 hour.
Answer: A
9. You are the administrator of two Windows 2000 Advanced Server computers named Server1 and Server2. You install two network adapters in each server and then connect them as shown in the following diagram.
You turn off Server2 and begin installing the Cluster service on Server1. In the Cluster Service Configuration wizard, you designate Client access only for Adapter 1B. The wizard does not allow you to configure Adapter 1A, however.
You verify that the crossover cable between Adapter 1A and Adapter 2A is connected properly.
You need to designate Internal cluster communications only for Adapter 1A. What should you do?
A. Start Server2, and enter the BIOS setup screen.
Run the Cluster Service Configuration wizard on Server1.
Designate Adapter 1A for Internal cluster communications only.
B. Start Server2, and start Windows 2000 Advanced Server, but do not log on.
Run the Cluster Service Configuration wizard on Server1.
Designate Adapter 1A for Internal cluster communications only.
C. Disconnect the crossover cable from Adapter 1A.
Run the Cluster Service Configuration wizard on Server1.
Designate Adapter 1A for Internal cluster communications only.
Connect the crossover cable to Adapter 1A.
D. Disconnect the crossover cable from Adapter 1A.
Run the Cluster Service Configuration wizard on Server1.
Designate Adapter 1A for All communications.
Connect the crossover cable to Adapter 1A.
Use the Cluster Administrator to designate Adapter 1A for Internal cluster communications only.
Answer: A
10. You are the administrator of two Windows 2000 Advanced Server computers. You need to configure these servers for use as cluster nodes.
Each server contains two network adapters. One network adapter in each server is designated for Client access only. The second network adapter in each server is designated for Internal cluster communications only. You plan to connect the second network in each server to a stand-alone hub,
You need to configure the IP addresses for the four network adapters. You want to minimize the chance of a failure in the network connectivity on both servers. What should you do?
A. Configure static IP addresses for the network adapters that are designated for Client access only.
Configure static IP addresses for the network adapters that are designated for Internal cluster communications only.
B. Configure dynamic IP addresses for the network adapters that are designated for Client access only.
Configure dynamic IP addresses for the network adapters that are designated for Internal cluster communications only.
C. Configure static IP addresses for the network adapters that are designated for Client access only.
Configure dynamic IP addresses for the network adapters that are designated for Internal cluster communications only.
D. Configure dynamic IP addresses for the network adapters that are designated for Client access only.
Configure static IP addresses for the network adapters that are designated for Internal cluster communications only.
Answer: A
11. You are the administrator of a Windows 2000 Advanced Server cluster. The cluster provides file and print services to 1,500 client computers in the manufacturing division. One private network on the cluster is configured for Internal cluster communications only. One public network is configured for Client access only. The average utilization for the network is 60 percent. Your company recently acquired another company, which will add 500 manufacturing client computers to the cluster environment within the next six months. You anticipate that this addition will increase network utilization. You want to modify the cluster environment to support the additional users. What should you do?
A. Designate the current public network for All communications.
B. Designate the current private network for All communications.
C. Add network adapters to each node for Client access only, configured in the existing manufacturing subnet.
D. Add network adapters to each node for Client access only, configured for a new manufacturing subnet and segment.
Answer: D
12. You are the administrator of two Windows 2000 Advanced Server computers named Server1 and Server2. You need to install the Cluster service on the servers. You install a SCSI array controller in each server.
Next, you connect the array controllers to an external storage subsystem by using SCSI cables. You need to install at least one SCSI terminator in the external storage subsystem at one or more of the locations shown in the exhibit. (Click the Exhibit button.)
Where should you install a SCSI terminator or SCSI terminators? (Choose all that apply.)
A. Install a SCSI terminator at location 1.
B. Install a SCSI terminator at location 2.
C. Install a SCSI terminator at location 3.
D. Install a SCSI terminator at location 4.
E. Install a SCSI terminator at location 5.
Answer: AE
13. You are the administrator of two Windows 2000 Advanced Server computers named Server1 and Server2. The servers have a Fibre Channel external storage subsystem that is connected as shown in the exhibit. (Click the Exhibit button.)
You discover that Server1 cannot access the external storage subsystem. You replace the fiber cable that connects Server1 to the Fibre Channel hub, but the problem persists. When you test the original fiber cable by using a cable tester, the test reveals no problems with the cable.
You swap the Fibre Channel Host-Based Adapter (HBA) in Server1 with the HBA in Server2. Server1 still cannot access the external storage subsystem. Hardware diagnostics report no failed ports on the Fibre Channel hub.
You need to be able to access the external storage subsystem from either server. What should you do?
A. Reinitialize the Fibre Channel hub.
B. Replace the Fibre Channel HBA in Server1.
C. Replace the Gigabit Interface Converter (GBIC) for Server1 in the Fibre Channel hub.
D. Replace the Gigabit Interface Converter (GBIC) for the external storage subsystem in the Fibre Channel hub.
Answer: C
14. You are the administrator of two Windows 2000 Advanced Server computers named Server1 and Server2. You need to install the Cluster service on both servers to create a new cluster.
First, you install two network adapters in each computer. You connect and configure the network adapters as shown in the following diagram.
You successfully install the Cluster service on Server1 and create a cluster named Cluster1.
Next, you attempt to install the Cluster service on Server2 and to join Server2 to Cluster1. The Cluster service Setup fails, and you receive the following error message: "Setup was unable to locate Cluster1 on the network."
You want to complete the Cluster service Setup. What should you do?
A. Uninstall the Cluster service on Server1.
Change the IP address on Adapter 1A to 172.17.55.14.
Reinstall the Cluster service on both servers.
B. Uninstall the Cluster service on Server1.
Change the IP address on Adapter 1A to 172.17.55.13.
Change the IP address on Adapter 2B to 172.17.54.13.
Reinstall the Cluster service on both servers.
C. Change the IP address on Adapter 1A to 172.17.54.14.
Change the IP address on Adapter 2B to 172.17.55.13.
Run the Cluster service Setup on Server2.
D. Change the IP address on Adapter 1B to 172.17.55.13.
Change the IP address on Adapter 2A to 172.17.54.14.
Run the Cluster service Setup on Server2.
Answer: D
Click Online chat to talk with us , get more informations about Microsoft MCSE 70-223 practice exam study guides questions and answers
¡¡
¡¡
Exam : Microsoft 70-223
Title : INST.CONF.&ADM MS CLUST SERV USING MS WIN2K ADV SERVER
1. You are the administrator of a two-node Windows 2000 Advanced Server cluster. The cluster is configured as shown in the following diagram.
Adapter 1A and Adapter 2A are designated for Client access only. Adapter 1B and Adapter 2B are designated for Internal cluster communications only.
Which network components represent a single point of failure for internal cluster communications? (Choose all that apply.)
A. Adapter 1A
B. Adapter 1B
C. Adapter 2A
D. Adapter 2B
E. the crossover cable
F. the stand-alone hub
Answer: BDE
2. You are the administrator of two new computers. You need to configure the computers before installing Windows 2000 Advanced Server and the Cluster service. You install a new SCSI controller in each computer. You connect both controllers to an external disk array, which will serve as the cluster storage. The external disk array contains three hard disks. You start both servers and receive a BIOS error message on each server. The error message indicates that a device conflict has been detected on the SCSI bus. You need to correct this error. What should you do?
A. Change the SCSI ID to 0 on all three hard disks.
B. Change the SCSI ID on one of the SCSI controllers.
C. Add a SCSI bus terminator to the connector on the external disk array.
D. Add a SCSI bus terminator to the connectors on both SCSI controllers.
Answer: B
3. You are the cluster administrator for your company. You need to configure two Windows 2000 Advanced Server computers for use as cluster nodes. You need to implement fault-tolerance methods for the local storage. You also need to implement fault-tolerance methods for the external storage subsystem.
Each server contains two 9.3-GB hard disks. The external storage subsystem contains eight 10-GB hard disks. You need to ensure that the cluster can tolerate the failure of a single hard disk in either server and in the external storage subsystem.
Which two fault-tolerance methods should you use? (Choose two.)
A. Configure the hard disks in each server as Windows 2000 striped volumes.
B. Configure the hard disks in each server as Windows 2000 RAID 5 volumes.
C. Configure the hard disks in each server as Windows 2000 mirrored volumes.
D. Configure the hard disks in the external storage subsystem to use a hardware RAID 5 array.
E. Configure the hard disks in the external storage subsystem as Windows 2000 striped volumes.
F. Configure the hard disks in the external storage subsystem as Windows 2000 RAID 5 volumes.
Answer: CD
4. You are the administrator of a Windows 2000 Advanced Server computer. You need to prepare the server for use as a cluster node. The server contains a SCSI controller and three internal 4.3-GB hard disks. You plan to attach the server to an external storage subsystem that contains eight 18.3-GB hard disks. You connect the three 4.3-GB hard disks to the SCSI controller's internal connector. Next, you connect the external storage subsystem to the SCSI controller's external connector. When you start the server, you receive numerous BIOS error messages that indicate errors on the SCSI bus. Before installing the Cluster service, you need to be able to access the internal and external disks that are attached to the server. What should you do?
A. Replace the SCSI controller.
B. Replace the external SCSI cable.
C. Set the SCSI ID to 6.
D. Install an additional SCSI controller in the server.
Connect the external drive array to the new controller's external connector.
E. Disable the on-board SCSI termination on the SCSI controller.
Connect a SCSI terminator to the SCSI-out connector on the external storage subsystem.
Answer: D
5. You are the administrator of a Windows 2000 Advanced Server cluster. You discover that the Quorum resource recovery log files on the cluster are corrupt. You need to restore the log files from a recent backup tape without overwriting other cluster data or system data. What should you do?
A. Perform a System State restore, and run the ntdsutil.exe command.
B. Restore the contents of the Quorum resource drive from the backup tape, and specify that the files be restored to their original location.
Use the Cluster Administrator to re-form the cluster.
C. Perform a System State restore, specifying an alternate location for the restore.
Copy the restored Quorum resource recovery files on the cluster to the quorum drive.
D. Use the Cluster Administrator to break the cluster.
Restore the contents of the Quorum resource drive from the backup tape, and specify that only the recovery log files be restored.
Use the Cluster Administrator to re-form the cluster.
Answer: C
6. You are the administrator of a Windows 2000 Advanced Server cluster named Cluster1. Cluster1 consists of two nodes that are designated NodeA and NodeB. Each node has 8 GB of local disk storage. The cluster storage is composed of eight 10-GB hard drives in a hardware RAID 5 array.
The local disk storage on both nodes consists of a single volume, which is shared as C$. The cluster storage is shared as Z$.
You need to implement a disaster recovery strategy that includes regular backups of the cluster. You decide to use Windows 2000 Backup.
You want to accomplish the following goals:
Perform a full daily backup of the cluster storage, even if one node in the cluster fails.
Perform a full daily backup of the System State data on the node that owns the Quorum resource.
Perform a full daily backup of the local disk storage on the node that owns the Quorum resource.
Save all of the backed-up data to a single tape.
You take the following actions:
Connect a 100-GB tape drive to NodeA.
Use Windows 2000 Backup to create a backup selection file that includes \Cluster1Z$ and \NodeAC$. Save the backup selection file in C:ClusterBack.bks on NodeA.
Use the Scheduler service on BackupSvr to launch Windows 2000 Backup daily. Use the following command line parameters: ntbackup backup systemstate c:clusterback.bks
Which result or results do these actions produce? (Choose all that apply.)
A. The cluster storage is fully backed up daily, even if one node in the cluster fails.
B. The System State data on the node that owns the Quorum resource is fully backed up daily.
C. The local disk storage on the node that owns the Quorum resource is fully backed up daily.
D. All of the backed-up data is saved to a single tape.
Answer: D
7. You are the administrator of a Windows 2000 Advanced Server cluster. The cluster consists of two nodes that are designated NodeA and NodeB. You configure several groups and resources, but you cannot bring any of the Network Name resources online. Windows 2000 is installed in the default location on both NodeA and NodeB, and the Quorum resource is located on logical drive Q in the default path. You attempt to view the log of cluster activity, but the log does not appear. You want to be able to review as much detail of the cluster activity as possible so that you can identify the problem. What should you do?
A. Increase the size of the quorum log.
B. Increase the size of the System event log.
C. Configure the Application event log to not overwrite events.
D. On both nodes, configure a system environment variable named ClusterLog with a value of C:winntclustercluster.log.
Answer: D
8. You are the administrator of a file cluster. The cluster consists of two nodes that are designated NodeA and NodeB. The cluster storage subsystem contains more than 1 TB of data. This data is accessed by more than 1,000 users daily. Each day, you process approximately 20 requests to create new shares in the cluster.
The systemroot folder on both nodes is configured as the default for Windows 2000. The cluster contains the default Cluster group, which contains the following resources:
Network Name = Cluster
IP Address = 192.168.5.101
Physical Disk = F
You want to ensure that the maximum time for loss of cluster configuration data is one hour.
What should you do?
A. Schedule an hourly backup of the system state data on each node.
B. Schedule an hourly backup of the C:winntCluster folder on each node.
C. Schedule an hourly backup of the HKEY_LOCAL_MACHINESystem registry key on both nodes.
D. In the Failover properties for the Cluster group, specify a Threshold of 1 and Period of 1 hour.
Answer: A
9. You are the administrator of two Windows 2000 Advanced Server computers named Server1 and Server2. You install two network adapters in each server and then connect them as shown in the following diagram.
You turn off Server2 and begin installing the Cluster service on Server1. In the Cluster Service Configuration wizard, you designate Client access only for Adapter 1B. The wizard does not allow you to configure Adapter 1A, however.
You verify that the crossover cable between Adapter 1A and Adapter 2A is connected properly.
You need to designate Internal cluster communications only for Adapter 1A. What should you do?
A. Start Server2, and enter the BIOS setup screen.
Run the Cluster Service Configuration wizard on Server1.
Designate Adapter 1A for Internal cluster communications only.
B. Start Server2, and start Windows 2000 Advanced Server, but do not log on.
Run the Cluster Service Configuration wizard on Server1.
Designate Adapter 1A for Internal cluster communications only.
C. Disconnect the crossover cable from Adapter 1A.
Run the Cluster Service Configuration wizard on Server1.
Designate Adapter 1A for Internal cluster communications only.
Connect the crossover cable to Adapter 1A.
D. Disconnect the crossover cable from Adapter 1A.
Run the Cluster Service Configuration wizard on Server1.
Designate Adapter 1A for All communications.
Connect the crossover cable to Adapter 1A.
Use the Cluster Administrator to designate Adapter 1A for Internal cluster communications only.
Answer: A
10. You are the administrator of two Windows 2000 Advanced Server computers. You need to configure these servers for use as cluster nodes.
Each server contains two network adapters. One network adapter in each server is designated for Client access only. The second network adapter in each server is designated for Internal cluster communications only. You plan to connect the second network in each server to a stand-alone hub,
You need to configure the IP addresses for the four network adapters. You want to minimize the chance of a failure in the network connectivity on both servers. What should you do?
A. Configure static IP addresses for the network adapters that are designated for Client access only.
Configure static IP addresses for the network adapters that are designated for Internal cluster communications only.
B. Configure dynamic IP addresses for the network adapters that are designated for Client access only.
Configure dynamic IP addresses for the network adapters that are designated for Internal cluster communications only.
C. Configure static IP addresses for the network adapters that are designated for Client access only.
Configure dynamic IP addresses for the network adapters that are designated for Internal cluster communications only.
D. Configure dynamic IP addresses for the network adapters that are designated for Client access only.
Configure static IP addresses for the network adapters that are designated for Internal cluster communications only.
Answer: A
11. You are the administrator of a Windows 2000 Advanced Server cluster. The cluster provides file and print services to 1,500 client computers in the manufacturing division. One private network on the cluster is configured for Internal cluster communications only. One public network is configured for Client access only. The average utilization for the network is 60 percent. Your company recently acquired another company, which will add 500 manufacturing client computers to the cluster environment within the next six months. You anticipate that this addition will increase network utilization. You want to modify the cluster environment to support the additional users. What should you do?
A. Designate the current public network for All communications.
B. Designate the current private network for All communications.
C. Add network adapters to each node for Client access only, configured in the existing manufacturing subnet.
D. Add network adapters to each node for Client access only, configured for a new manufacturing subnet and segment.
Answer: D
12. You are the administrator of two Windows 2000 Advanced Server computers named Server1 and Server2. You need to install the Cluster service on the servers. You install a SCSI array controller in each server.
Next, you connect the array controllers to an external storage subsystem by using SCSI cables. You need to install at least one SCSI terminator in the external storage subsystem at one or more of the locations shown in the exhibit. (Click the Exhibit button.)
Where should you install a SCSI terminator or SCSI terminators? (Choose all that apply.)
A. Install a SCSI terminator at location 1.
B. Install a SCSI terminator at location 2.
C. Install a SCSI terminator at location 3.
D. Install a SCSI terminator at location 4.
E. Install a SCSI terminator at location 5.
Answer: AE
13. You are the administrator of two Windows 2000 Advanced Server computers named Server1 and Server2. The servers have a Fibre Channel external storage subsystem that is connected as shown in the exhibit. (Click the Exhibit button.)
You discover that Server1 cannot access the external storage subsystem. You replace the fiber cable that connects Server1 to the Fibre Channel hub, but the problem persists. When you test the original fiber cable by using a cable tester, the test reveals no problems with the cable.
You swap the Fibre Channel Host-Based Adapter (HBA) in Server1 with the HBA in Server2. Server1 still cannot access the external storage subsystem. Hardware diagnostics report no failed ports on the Fibre Channel hub.
You need to be able to access the external storage subsystem from either server. What should you do?
A. Reinitialize the Fibre Channel hub.
B. Replace the Fibre Channel HBA in Server1.
C. Replace the Gigabit Interface Converter (GBIC) for Server1 in the Fibre Channel hub.
D. Replace the Gigabit Interface Converter (GBIC) for the external storage subsystem in the Fibre Channel hub.
Answer: C
14. You are the administrator of two Windows 2000 Advanced Server computers named Server1 and Server2. You need to install the Cluster service on both servers to create a new cluster.
First, you install two network adapters in each computer. You connect and configure the network adapters as shown in the following diagram.
You successfully install the Cluster service on Server1 and create a cluster named Cluster1.
Next, you attempt to install the Cluster service on Server2 and to join Server2 to Cluster1. The Cluster service Setup fails, and you receive the following error message: "Setup was unable to locate Cluster1 on the network."
You want to complete the Cluster service Setup. What should you do?
A. Uninstall the Cluster service on Server1.
Change the IP address on Adapter 1A to 172.17.55.14.
Reinstall the Cluster service on both servers.
B. Uninstall the Cluster service on Server1.
Change the IP address on Adapter 1A to 172.17.55.13.
Change the IP address on Adapter 2B to 172.17.54.13.
Reinstall the Cluster service on both servers.
C. Change the IP address on Adapter 1A to 172.17.54.14.
Change the IP address on Adapter 2B to 172.17.55.13.
Run the Cluster service Setup on Server2.
D. Change the IP address on Adapter 1B to 172.17.55.13.
Change the IP address on Adapter 2A to 172.17.54.14.
Run the Cluster service Setup on Server2.
Answer: D
Click Online chat to talk with us , get more informations about Microsoft MCSE 70-223 practice exam study guides questions and answers
Test4pass 70-223 Exam Features
Quality and Value for the 70-223 Exam
Test4pass Practice Exams for Microsoft 70-223 are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.
100% Guarantee to Pass Your 70-223 Exam
If you prepare for the exam using our Test4pass testing engine, we guarantee your success in the first attempt. If you do not pass the MCSE 70-223 exam (ProCurve Secure WAN) on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.
Microsoft 70-223 Downloadable, Printable Exams (in PDF format)
Our Exam 70-223 Preparation Material provides you everything you will need to take your 70-223 Exam. The 70-223 Exam details are researched and produced by Professional Certification Experts who are constantly using industry experience to produce precise, and logical. You may get questions from different web sites or books, but logic is the key. Our Product will help you not only pass in the first try, but also save your valuable time.
70-223 Downloadable, Interactive Testing engines
We are all well aware that a major problem in the IT industry is that there is a lack of quality study materials. Our Exam Preparation Material provides you everything you will need to take a certification examination. Like actual certification exams, our Practice Tests are in multiple-choice (MCQs) Our Microsoft 70-223 Exam will provide you with free 70-223 dumps questions with verified answers that reflect the actual exam. These questions and answers provide you with the experience of taking the actual test. High quality and Value for the 70-223 Exam:100% Guarantee to Pass Your MCSE exam and get your MCSE Certification.
Test4pass 70-223 examTest4pass 70-223 pdf exam
Test4pass 70-223 braindumps
Test4pass 70-223 study guides
Test4pass 70-223 trainning materials
Test4pass 70-223 simulations
Test4pass 70-223 testing engine
Test4pass 70-223 vce
Test4pass 70-223 torrent
Test4pass 70-223 dumps
free download 70-223
Test4pass 70-223 practice exam
Test4pass 70-223 preparation files
Test4pass 70-223 questions
Test4pass 70-223 answers
http://www.test4pass.com/70-223-exam.html The safer.easier way to get MCSE Certification
.
