642-812 Exam
Building Cisco Multilayer Switched Networks
- Exam Number/Code : 642-812
- Exam Name : Building Cisco Multilayer Switched Networks
- Questions and Answers : 252 Q&As
- Update Time: 2010-07-26
- Price:
$ 119.00$ 99.00
Free 642-812 Demo Download
Test4pass offers free demo for CCNP 642-812 exam (Building Cisco Multilayer Switched Networks). You can check out the interface, question quality and usability of our practice exams before you decide to buy it. We are the only one site can offer demo for almost all products.
Exam Description
It is well known that 642-812 exam test is the hot exam of Cisco certification. Test4pass offer you all the Q&A of the 642-812 real test . It is the examination of the perfect combination and it will help you pass 642-812 exam at the first time!
Why choose Test4pass 642-812 braindumps
Quality and Value for the 642-812 Exam
100% Guarantee to Pass Your 642-812 Exam
Downloadable, Interactive 642-812 Testing engines
Verified Answers Researched by Industry Experts
Drag and Drop questions as experienced in the Actual Exams
Practice Test Questions accompanied by exhibits
Our Practice Test Questions are backed by our 100% MONEY BACK GUARANTEE.
Cisco CCNP 642-812 exam braindumps questions and answers
¡¡
¡¡
Exam : Cisco 642-812
Title : BCMSN - Building Converged Cisco Multilayer Switched Networks
1. Refer to the exhibit. Which statement is true about where trust boundaries should be established in a network?
A. Endpoint 1 is the only acceptable place to establish a trust boundary.
B. Endpoint 1 is the optimal place to establish a trust boundary. Endpoints 2 and 3 are acceptable places to establish a trust boundary.
C. Endpoint 2 is the only acceptable place to establish a trust boundary.
D. Endpoint 2 is the optimal place to establish a trust boundary. Endpoints 1 and 3 are acceptable places to establish a trust boundary.
E. Endpoints 1 and 2 are optimal places to establish a trust boundary. Endpoint 3 is an acceptable place to establish a trust boundary.
F. Endpoints 2 and 3 are optimal places to establish a trust boundary. Endpoint 1 is an acceptable place to establish a trust boundary.
Answer: E
2. Refer to the exhibit. Switch S1 has been configured with the command spanning-tree mode rapid-pvst. Switch S3 has been configured with the command spanning-tree mode mst. Switch S2 is running the IEEE 802.1D instance of Spanning-Tree. What will be the result?
A. IEEE 802.1w, and IEEE 802.1s are compatible. IEEE 802.1d is incompatible. Switches S1 and S3 will be able to pass traffic between themselves. Neither will be able to pass traffic to Switch S2.
B. Switches S1, S2, and S3 will be able to pass traffic between themselves.
C. Switches S1, S2, and S3 will be able to pass traffic between themselves. However, if there is a topology change, Switch S2 will not receive notification of the change.
D. IEEE 802.1d, IEEE 802.1w, and IEEE 802.1s are incompatible. All three switches must use the same standard or no traffic will pass between any of the switches.
Answer: B
3. Refer to the exhibit. What is the effect when the switchport priority extend cos 3 command is configured on the switch port interface connected to the IP phone?
A. Effectively, the trust boundary has been moved to the PC attached to the IP phone.
B. The computer is now establishing the CoS value and has effectively become the trust boundary.
C. The IP phone is enabled to override with a CoS value of 3 the existing CoS marking of the PC attached to the IP phone.
D. The switch will no longer tag incoming voice packets and will extend the trust boundary to the distribution layer switch.
E. RTP will be used to negotiate a CoS value based upon bandwidth utilization on the link.
Answer: C
4. Refer to the exhibit. The command spanning-tree guard root is configured on interface Gi0/0 on both switch S2 and S5. The global configuration command spanning-tree uplinkfast has been configured on both switch S2 and S5. The link between switch S4 and S5 fails. Will Host A be able to reach Host B?
A. Yes. Traffic can pass either from switch S6 to S3 to S2 to S1, or, from switch S6 to S5 to S2 to S1.
B. No. Traffic will pass from switch S6 to S5 and dead-end at interface Gi 0/0.
C. No. Traffic will loop back and forth between switch S5 and S2.
D. Yes. Traffic will pass from switch S6 to S3 to S2 to S1.
E. No. Traffic will either pass from switch S6 to S5 and dead-end, or traffic will pass from switch S6 to S3 to S2 and dead-end.
Answer: D
5. Which three WLAN statements are true? (Choose three.)
A. A lightweight AP receives control and configuration from a WLAN controller to which it is associated.
B. A WLAN client that is operating in half-duplex mode will delay all clients in that WLAN.
C. Ad hoc mode allows mobile clients to connect directly without an intermediate AP.
D. Another term for infrastructure mode is independent service set (IBSS).
E. The Aironet 1230 access point is an example of an access point that operates solely as a lightweight access point.
F. WLANs are designed to share the medium and can easily handle an increased demand of channel contention.
Answer: ABC
6. Which statement about the Lightweight Access Point Protocol (LWAPP) is true?
A. LWAPP encrypts control traffic between the AP and the controller.
B. LWAPP encrypts user traffic with a x.509 certificate using AES-CCMP.
C. LWAPP encrypts both control traffic and user data.
D. When set to Layer 3, LWAPP uses a proprietary protocol to communicate with the Cisco Aironet APs.
Answer: A
7. Refer to the exhibit. A Cisco Aironet Wireless LAN Client Adapter has been installed and configured through the ADU on the PC. The Aironet System Tray Utility (ASTU) has been enabled during the installation and the icon appears in the system tray area in the lower right of the desktop. What is the significance of the icon?
A. It indicates that the radio of the client adapter is disabled.
B. It indicates that the client adapter is not associated to an access point or another client.
C. It indicates that the client adapter is associated to an access point or another client, but the user is not EAP authenticated.
D. It indicates that the client adapter is associated to an access point or another client, that the user is authenticated if the client adapter is configured for EAP authentication, and that the signal strength is excellent or good.
E. It indicates that the client adapter is associated to an access point or another client, that the user is authenticated if the client adapter is configured for EAP authentication, and that the signal strength is fair.
F. It indicates that the client adapter is associated to an access point or another client, that the user is authenticated if the client adapter is configured for EAP authentication, and that the signal strength is poor.
Answer: F
8. Refer to the exhibit. Which three statements are true about trust boundaries in the campus network? (Choose three.)
A. A device is trusted if it correctly classifies packets.
B. A device is trusted if it correctly declassifies packets.
C. The outermost trusted devices represent the trust boundary.
D. Classification and marking occur using 802.1ab QoS bits before reaching the trust boundary.
E. Network trust boundaries are automatically configured in IOS version 12.3 and later.
F. For scalability, classification should be done as close to the edge as possible.
Answer: ACF
9. Which statement is true about RSTP topology changes?
A. Any change in the state of the port generates a TC BPDU.
B. Only nonedge ports moving to the forwarding state generate a TC BPDU.
C. If either an edge port or a nonedge port moves to a block state, then a TC BPDU is generated.
D. Only nonedge ports moving to the blocking state generate a TC BPDU.
E. Any loss of connectivity generates a TC BPDU.
Answer: B
10. Refer to the exhibit. What is the effect on the trust boundary of configuring the command mls qos trust cos on the switch port that is connected to the IP phone?
A. Effectively the trust boundary has been moved to the IP phone.
B. The host is now establishing the CoS value and has effectively become the trust boundary.
C. The switch is rewriting packets it receives from the IP phone and determining the CoS value.
D. The switch will no longer tag incoming voice packets and will trust the distribution layer switch to set the CoS.
E. RTP will be used to negotiate a CoS value based upon bandwidth utilization on the link.
Answer: A
11. Which description correctly describes a MAC address flooding attack?
A. The attacking device crafts ARP replies intended for valid hosts. The MAC address of the attacking device then becomes the destination address found in the Layer 2 frames sent by the valid network device.
B. The attacking device crafts ARP replies intended for valid hosts. The MAC address of the attacking device then becomes the source address found in the Layer 2 frames sent by the valid network device.
C. The attacking device spoofs a destination MAC address of a valid host currently in the CAM table. The switch then forwards frames destined for the valid host to the attacking device.
D. The attacking device spoofs a source MAC address of a valid host currently in the CAM table. The switch then forwards frames destined for the valid host to the attacking device.
E. Frames with unique, invalid destination MAC addresses flood the switch and exhaust CAM table space. The result is that new entries cannot be inserted because of the exhausted CAM table space, and traffic is subsequently flooded out all ports.
F. Frames with unique, invalid source MAC addresses flood the switch and exhaust CAM table space. The result is that new entries cannot be inserted because of the exhausted CAM table space, and traffic is subsequently flooded out all ports.
Answer: F
12. Which statement is true about IP telephony calls?
A. A Voice over IP (VoIP) packet consists of the voice payload, IP header, TCP header, RTP header, and Layer 2 link header.
B. The voice carrier stream uses H.323 to set up, maintain, and tear down call endpoints.
C. Call control signaling uses Real-Time Transport Protocol (RTP) packets that contain actual voice samples.
D. The sum of bandwidth necessary for each major application, including voice, video, and data, should not exceed 75 percent of the total available bandwidth for each link.
Answer: D
13. Which issue or set of issues does the Lightweight Access Point Protocol (LWAPP) address?
A. reduction of processing in wireless controllers
B. distributed approach to authentication, encryption, and policy enforcement
C. provides security by blocking communication between access points and wireless clients
D. access point discovery, information exchange, and configuration
Answer: D
14. Refer to the exhibit. Switch S2 contains the default configuration. Switches S1 and S3 both have had the command spanning-tree mode rapid-pvst issued on them. What will be the result?
A. Switches S1 and S3 will be able to exchange traffic but neither will be able to exchange traffic with Switch S2
B. Switches S1, S2, and S3 will be able to pass traffic between themselves. However, if there is a topology change, Switch S2 will not receive notification of the change.
C. Switches S1, S2, and S3 will be able to pass traffic among themselves.
D. IEEE 802.1D and IEEE 802.1w are incompatible. All three switches must use the same standard or no traffic will pass between any of the switches.
Answer: C
Click Online chat to talk with us , get more informations about Cisco CCNP 642-812 practice exam study guides questions and answers
¡¡
Exam : Cisco 642-812
Title : BCMSN - Building Converged Cisco Multilayer Switched Networks
1. Refer to the exhibit. Which statement is true about where trust boundaries should be established in a network?
A. Endpoint 1 is the only acceptable place to establish a trust boundary.
B. Endpoint 1 is the optimal place to establish a trust boundary. Endpoints 2 and 3 are acceptable places to establish a trust boundary.
C. Endpoint 2 is the only acceptable place to establish a trust boundary.
D. Endpoint 2 is the optimal place to establish a trust boundary. Endpoints 1 and 3 are acceptable places to establish a trust boundary.
E. Endpoints 1 and 2 are optimal places to establish a trust boundary. Endpoint 3 is an acceptable place to establish a trust boundary.
F. Endpoints 2 and 3 are optimal places to establish a trust boundary. Endpoint 1 is an acceptable place to establish a trust boundary.
Answer: E
2. Refer to the exhibit. Switch S1 has been configured with the command spanning-tree mode rapid-pvst. Switch S3 has been configured with the command spanning-tree mode mst. Switch S2 is running the IEEE 802.1D instance of Spanning-Tree. What will be the result?
A. IEEE 802.1w, and IEEE 802.1s are compatible. IEEE 802.1d is incompatible. Switches S1 and S3 will be able to pass traffic between themselves. Neither will be able to pass traffic to Switch S2.
B. Switches S1, S2, and S3 will be able to pass traffic between themselves.
C. Switches S1, S2, and S3 will be able to pass traffic between themselves. However, if there is a topology change, Switch S2 will not receive notification of the change.
D. IEEE 802.1d, IEEE 802.1w, and IEEE 802.1s are incompatible. All three switches must use the same standard or no traffic will pass between any of the switches.
Answer: B
3. Refer to the exhibit. What is the effect when the switchport priority extend cos 3 command is configured on the switch port interface connected to the IP phone?
A. Effectively, the trust boundary has been moved to the PC attached to the IP phone.
B. The computer is now establishing the CoS value and has effectively become the trust boundary.
C. The IP phone is enabled to override with a CoS value of 3 the existing CoS marking of the PC attached to the IP phone.
D. The switch will no longer tag incoming voice packets and will extend the trust boundary to the distribution layer switch.
E. RTP will be used to negotiate a CoS value based upon bandwidth utilization on the link.
Answer: C
4. Refer to the exhibit. The command spanning-tree guard root is configured on interface Gi0/0 on both switch S2 and S5. The global configuration command spanning-tree uplinkfast has been configured on both switch S2 and S5. The link between switch S4 and S5 fails. Will Host A be able to reach Host B?
A. Yes. Traffic can pass either from switch S6 to S3 to S2 to S1, or, from switch S6 to S5 to S2 to S1.
B. No. Traffic will pass from switch S6 to S5 and dead-end at interface Gi 0/0.
C. No. Traffic will loop back and forth between switch S5 and S2.
D. Yes. Traffic will pass from switch S6 to S3 to S2 to S1.
E. No. Traffic will either pass from switch S6 to S5 and dead-end, or traffic will pass from switch S6 to S3 to S2 and dead-end.
Answer: D
5. Which three WLAN statements are true? (Choose three.)
A. A lightweight AP receives control and configuration from a WLAN controller to which it is associated.
B. A WLAN client that is operating in half-duplex mode will delay all clients in that WLAN.
C. Ad hoc mode allows mobile clients to connect directly without an intermediate AP.
D. Another term for infrastructure mode is independent service set (IBSS).
E. The Aironet 1230 access point is an example of an access point that operates solely as a lightweight access point.
F. WLANs are designed to share the medium and can easily handle an increased demand of channel contention.
Answer: ABC
6. Which statement about the Lightweight Access Point Protocol (LWAPP) is true?
A. LWAPP encrypts control traffic between the AP and the controller.
B. LWAPP encrypts user traffic with a x.509 certificate using AES-CCMP.
C. LWAPP encrypts both control traffic and user data.
D. When set to Layer 3, LWAPP uses a proprietary protocol to communicate with the Cisco Aironet APs.
Answer: A
7. Refer to the exhibit. A Cisco Aironet Wireless LAN Client Adapter has been installed and configured through the ADU on the PC. The Aironet System Tray Utility (ASTU) has been enabled during the installation and the icon appears in the system tray area in the lower right of the desktop. What is the significance of the icon?
A. It indicates that the radio of the client adapter is disabled.
B. It indicates that the client adapter is not associated to an access point or another client.
C. It indicates that the client adapter is associated to an access point or another client, but the user is not EAP authenticated.
D. It indicates that the client adapter is associated to an access point or another client, that the user is authenticated if the client adapter is configured for EAP authentication, and that the signal strength is excellent or good.
E. It indicates that the client adapter is associated to an access point or another client, that the user is authenticated if the client adapter is configured for EAP authentication, and that the signal strength is fair.
F. It indicates that the client adapter is associated to an access point or another client, that the user is authenticated if the client adapter is configured for EAP authentication, and that the signal strength is poor.
Answer: F
8. Refer to the exhibit. Which three statements are true about trust boundaries in the campus network? (Choose three.)
A. A device is trusted if it correctly classifies packets.
B. A device is trusted if it correctly declassifies packets.
C. The outermost trusted devices represent the trust boundary.
D. Classification and marking occur using 802.1ab QoS bits before reaching the trust boundary.
E. Network trust boundaries are automatically configured in IOS version 12.3 and later.
F. For scalability, classification should be done as close to the edge as possible.
Answer: ACF
9. Which statement is true about RSTP topology changes?
A. Any change in the state of the port generates a TC BPDU.
B. Only nonedge ports moving to the forwarding state generate a TC BPDU.
C. If either an edge port or a nonedge port moves to a block state, then a TC BPDU is generated.
D. Only nonedge ports moving to the blocking state generate a TC BPDU.
E. Any loss of connectivity generates a TC BPDU.
Answer: B
10. Refer to the exhibit. What is the effect on the trust boundary of configuring the command mls qos trust cos on the switch port that is connected to the IP phone?
A. Effectively the trust boundary has been moved to the IP phone.
B. The host is now establishing the CoS value and has effectively become the trust boundary.
C. The switch is rewriting packets it receives from the IP phone and determining the CoS value.
D. The switch will no longer tag incoming voice packets and will trust the distribution layer switch to set the CoS.
E. RTP will be used to negotiate a CoS value based upon bandwidth utilization on the link.
Answer: A
11. Which description correctly describes a MAC address flooding attack?
A. The attacking device crafts ARP replies intended for valid hosts. The MAC address of the attacking device then becomes the destination address found in the Layer 2 frames sent by the valid network device.
B. The attacking device crafts ARP replies intended for valid hosts. The MAC address of the attacking device then becomes the source address found in the Layer 2 frames sent by the valid network device.
C. The attacking device spoofs a destination MAC address of a valid host currently in the CAM table. The switch then forwards frames destined for the valid host to the attacking device.
D. The attacking device spoofs a source MAC address of a valid host currently in the CAM table. The switch then forwards frames destined for the valid host to the attacking device.
E. Frames with unique, invalid destination MAC addresses flood the switch and exhaust CAM table space. The result is that new entries cannot be inserted because of the exhausted CAM table space, and traffic is subsequently flooded out all ports.
F. Frames with unique, invalid source MAC addresses flood the switch and exhaust CAM table space. The result is that new entries cannot be inserted because of the exhausted CAM table space, and traffic is subsequently flooded out all ports.
Answer: F
12. Which statement is true about IP telephony calls?
A. A Voice over IP (VoIP) packet consists of the voice payload, IP header, TCP header, RTP header, and Layer 2 link header.
B. The voice carrier stream uses H.323 to set up, maintain, and tear down call endpoints.
C. Call control signaling uses Real-Time Transport Protocol (RTP) packets that contain actual voice samples.
D. The sum of bandwidth necessary for each major application, including voice, video, and data, should not exceed 75 percent of the total available bandwidth for each link.
Answer: D
13. Which issue or set of issues does the Lightweight Access Point Protocol (LWAPP) address?
A. reduction of processing in wireless controllers
B. distributed approach to authentication, encryption, and policy enforcement
C. provides security by blocking communication between access points and wireless clients
D. access point discovery, information exchange, and configuration
Answer: D
14. Refer to the exhibit. Switch S2 contains the default configuration. Switches S1 and S3 both have had the command spanning-tree mode rapid-pvst issued on them. What will be the result?
A. Switches S1 and S3 will be able to exchange traffic but neither will be able to exchange traffic with Switch S2
B. Switches S1, S2, and S3 will be able to pass traffic between themselves. However, if there is a topology change, Switch S2 will not receive notification of the change.
C. Switches S1, S2, and S3 will be able to pass traffic among themselves.
D. IEEE 802.1D and IEEE 802.1w are incompatible. All three switches must use the same standard or no traffic will pass between any of the switches.
Answer: C
Click Online chat to talk with us , get more informations about Cisco CCNP 642-812 practice exam study guides questions and answers
Test4pass 642-812 Exam Features
Quality and Value for the 642-812 Exam
Test4pass Practice Exams for Cisco 642-812 are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.
100% Guarantee to Pass Your 642-812 Exam
If you prepare for the exam using our Test4pass testing engine, we guarantee your success in the first attempt. If you do not pass the CCNP 642-812 exam (ProCurve Secure WAN) on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.
Cisco 642-812 Downloadable, Printable Exams (in PDF format)
Our Exam 642-812 Preparation Material provides you everything you will need to take your 642-812 Exam. The 642-812 Exam details are researched and produced by Professional Certification Experts who are constantly using industry experience to produce precise, and logical. You may get questions from different web sites or books, but logic is the key. Our Product will help you not only pass in the first try, but also save your valuable time.
642-812 Downloadable, Interactive Testing engines
We are all well aware that a major problem in the IT industry is that there is a lack of quality study materials. Our Exam Preparation Material provides you everything you will need to take a certification examination. Like actual certification exams, our Practice Tests are in multiple-choice (MCQs) Our Cisco 642-812 Exam will provide you with free 642-812 dumps questions with verified answers that reflect the actual exam. These questions and answers provide you with the experience of taking the actual test. High quality and Value for the 642-812 Exam:100% Guarantee to Pass Your CCNP exam and get your CCNP Certification.
Test4pass 642-812 examTest4pass 642-812 pdf exam
Test4pass 642-812 braindumps
Test4pass 642-812 study guides
Test4pass 642-812 trainning materials
Test4pass 642-812 simulations
Test4pass 642-812 testing engine
Test4pass 642-812 vce
Test4pass 642-812 torrent
Test4pass 642-812 dumps
free download 642-812
Test4pass 642-812 practice exam
Test4pass 642-812 preparation files
Test4pass 642-812 questions
Test4pass 642-812 answers
http://www.test4pass.com/642-812-exam.html The safer.easier way to get CCNP Certification
.
My Shopping Cart
