642-811 Exam
Building Cisco Multilayer Switched Networks (BCMSN)
- Exam Number/Code : 642-811
- Exam Name : Building Cisco Multilayer Switched Networks (BCMSN)
- Questions and Answers : 266 Q&As
- Update Time: 2011-09-21
- Price:
$ 119.00$ 69.00
Free 642-811 Demo Download
Test4pass offers free demo for CCNP 642-811 exam (Building Cisco Multilayer Switched Networks (BCMSN)). You can check out the interface, question quality and usability of our practice exams before you decide to buy it. We are the only one site can offer demo for almost all products.
Exam Description
It is well known that 642-811 exam test is the hot exam of Cisco certification. Test4pass offer you all the Q&A of the 642-811 real test . It is the examination of the perfect combination and it will help you pass 642-811 exam at the first time!
Why choose Test4pass 642-811 braindumps
Quality and Value for the 642-811 Exam
100% Guarantee to Pass Your 642-811 Exam
Downloadable, Interactive 642-811 Testing engines
Verified Answers Researched by Industry Experts
Drag and Drop questions as experienced in the Actual Exams
Practice Test Questions accompanied by exhibits
Our Practice Test Questions are backed by our 100% MONEY BACK GUARANTEE.
Cisco CCNP 642-811 exam braindumps questions and answers
¡¡
Exam : Cisco 642-811
Title : Building Cisco Multilayer Switched Networks(BCMSN)
1. Which three statements are true regarding the above diagram? (Choose three.)
A. A trunk link will be formed.
B. Only VLANs 1-1001 will travel across the trunk link.
C. The native VLAN for Switch B is vlan 1.
D. DTP is not running on Switch A.
E. DTP packets are sent from Switch B.
Answer: ACE
2. Refer to the exhibit.
On the basis of the information provided in the exhibit, which two sets of procedures are best practices for Layer 2 and 3 failover alignment? (Choose two.)
A. Configure the D-SW1 switch as the active HSRP router and the STP root for all VLANs. Configure the D-SW2 switch as the standby HSRP router and backup STP root for all VLANs.
B. Configure the D-SW2 switch as the active HSRP router and the STP root for all VLANs. Configure the D-SW1 switch as the standby HSRP router and backup STP root for all VLANs.
C. Configure the D-SW1 switch as the active HSRP router and the STP root for VLANs 11 and 110. Configure the D-SW2 switch as the active HSRP router and the STP root for VLANs 12 and 120.
D. Configure the D-SW1 switch as the standby HSRP router and the backup STP root for VLANs 12 and 120. Configure the D-SW2 switch as the standby HSRP router and the backup STP root for VLANs 11 and 110.
E. Configure the D-SW1 switch as the standby HSRP router and the STP root for VLANs 11 and 110. Configure the D-SW2 switch as the standby HSRP router and the STP root for VLANs 12 and 120.
F. Configure the D-SW1 switch as the active HSRP router and the backup STP root for VLANs 11 and 110. Configure the D-SW2 switch as the active HSRP router and the backup STP root for VLANs 12 and 120.
Answer: CD
3. If there are two equal cost paths to the root switch, what is the next criterion to determine the root port?
A. lowest time to receive BPDUs
B. lowest port ID
C. lowest sender bridge ID
D. highest MAC address on the receiving port
Answer: C
4. Examine the router output above. Which two items are correct? (Choose two.)
A. Router A will assume the active state if its priority is the highest.
B. If Ethernet 0/2 goes down, the standby router will take over.
C. When Ethernet 0/3 of RouterA comes back up, the priority will become 105.
D. The local IP address of Router A is 10.1.0.6.
E. The local IP address of Router A is 10.1.0.20.
Answer: AC
5. In the use of 802.1X access control, which three protocols are allowed through the switch port before authentication takes place? (Choose three.)
A. STP
B. CDP
C. EAP MD5
D. TACACS+
E. EAP-over-LAN
F. protocols not filtered by an ACL
Answer: ABE
6. LAB
The information of the question
VTP Domain name : cisco
VLAN Ids 20 31
IP Addresses 172.16.71.1/24 172.16.132.1/24
These are your specific tasks:
1. Configure the VTP information with the distribution layer switch as the VTP server
2. Configure the VTP information with the access layer switch as a VTP client
3. Configure VLANs on the distribution layer switch
4. Configure inter-VLAN routing on the distribution layer switch
5. Specific VLAN port assignments will be made as users are added to the access layer switches in the future.
6. All VLANs and VTP configurations are to completed in the global configuration To configure the switch click on the host icon that is connected to the switch be way of a serial console cable.
Correct Answers:
vtp server configuration:
switch#conf t
switch(config)#vtp mode server
switch(config)#vtp domain CISCO
switch(config)#vlan 20
switch(config)#vlan 31
switch(config)#int vlan 20
switch(if-config)#ip add 172.64.20.1 255.255.255.0
switch(if-config)#no shut
switch(if-config)#int vlan 31
switch(if-config)#ip add 192.162.31.1 255.255.255.0
switch(if-config)#no shut
switch(if-config)#exit
switch#ip routing
switch#copy run start
vtp client configuration:
switch#conf t
switch(config)#vtp mode client
switch(config)#vtp domain CISCO
switch#copy run start
14. In the use of 802.1X access control, which three protocols are allowed through the switch port before authentication takes place? (Choose three.)
A. STP
B. CDP
C. EAP MD5
D. TACACS+
E. EAP-over-LAN
F. protocols not filtered by an ACL
Answer: ABE
7. Which two statements are true about a switched virtual interface (SVI)? (Choose two.)
A. An SVI is created by entering the no switchport command in interface configuration mode.
B. An SVI is created for the default VLAN (VLAN1) to permit remote switch administration by default.
C. An SVI provides a default gateway for a VLAN.
D. Multiple SVIs can be associated with a VLAN.
E. SVI is another name for a routed port.
Answer: BC
8. Which two multicast IP addresses can be represented by the multicast MAC address 0100.5e0A.0A07? (Choose two.)
A. 228.10.10.7
B. 228.10.10.8
C. 228.10.138.7
D. 229.11.10.7
E. 229.138.10.7
F. 229.138.10.8
Answer: AE
9. Which three interface commands will configure the switch port to support a connected Cisco phone and to trust the CoS values received on the port if CDP discovers that a Cisco phone is attached? (Choose three.)
A. mls qos trust override cos
B. mls qos trust cos
C. mls qos trust device cisco-phone
D. switchport priority extend cos_value
E. switchport voice vlan vlan-id
Answer: BCE
10. Which spanning-tree feature will disable ports configured for PortFast in the event of a BPDU being received on those ports?
A. BPDUGuard
B. BPDU filtering
C. UDLD
D. Root Guard
Answer: A
11. Which is a valid multicast MAC address?
A. 00-00-00-FA-11-67
B. 01-00-E0-56-AE-3C
C. 00-01-E0-A8-B2-C1
D. 01-00-5E-0A-08-CF
E. FF-FF-FF-FF-FF-FF
Answer: D
12. Given the following configuration on a switch interface, what happens when a host with the MAC address of 0003.0003.0003 is directly connected to the switch port? switchport mode access switchport port-security switchport port-security maximum 2 switchport port-security mac-address 0002.0002.0002 switchport port-security violation shutdown
A. The port will shut down.
B. The host will be allowed to connect.
C. The host will be refused access.
D. The host can only connect through a hub/switch where 0002.0002.0002 is already connected.
Answer: B
13. A network is configured with VLANs 1 through 802.1 Q trunking is enabled between all switches. Currently, access ports for VLAN 3 exist only on Switch3 and Switch6. What must the administrator do to ensure that the other switches do not receive unnecessary broadcast packets for VLAN 3 while still allowing all other VLAN packets to cross?
A. Configure VTP pruning.
B. Configure Switch3 and Switch6 as transparent switches.
C. Configure Switch1, Switch2, Switch4 and Switch5 as transparent switches.
D. Nothing is required. Only Switch3 and Switch6 will receive VLAN3 packets by default.
Answer: A
14. What action should a network administrator take to enable VTP pruning on an entire management domain?
A. enable VTP pruning on any client switch in the domain
B. enable VTP pruning on every switch in the domain
C. enable VTP pruning on any switch in the management domain
D. enable VTP pruning on a VTP server in the management domain
Answer: D
Click Online chat to talk with us , get more informations about Cisco CCNP 642-811 practice exam study guides questions and answers
Test4pass 642-811 Exam Features
Quality and Value for the 642-811 Exam
Test4pass Practice Exams for Cisco 642-811 are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.
100% Guarantee to Pass Your 642-811 Exam
If you prepare for the exam using our Test4pass testing engine, we guarantee your success in the first attempt. If you do not pass the CCNP 642-811 exam (ProCurve Secure WAN) on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.
Cisco 642-811 Downloadable, Printable Exams (in PDF format)
Our Exam 642-811 Preparation Material provides you everything you will need to take your 642-811 Exam. The 642-811 Exam details are researched and produced by Professional Certification Experts who are constantly using industry experience to produce precise, and logical. You may get questions from different web sites or books, but logic is the key. Our Product will help you not only pass in the first try, but also save your valuable time.
642-811 Downloadable, Interactive Testing engines
We are all well aware that a major problem in the IT industry is that there is a lack of quality study materials. Our Exam Preparation Material provides you everything you will need to take a certification examination. Like actual certification exams, our Practice Tests are in multiple-choice (MCQs) Our Cisco 642-811 Exam will provide you with free 642-811 dumps questions with verified answers that reflect the actual exam. These questions and answers provide you with the experience of taking the actual test. High quality and Value for the 642-811 Exam:100% Guarantee to Pass Your CCNP exam and get your CCNP Certification.
Test4pass 642-811 examTest4pass 642-811 pdf exam
Test4pass 642-811 braindumps
Test4pass 642-811 study guides
Test4pass 642-811 trainning materials
Test4pass 642-811 simulations
Test4pass 642-811 testing engine
Test4pass 642-811 vce
Test4pass 642-811 torrent
Test4pass 642-811 dumps
free download 642-811
Test4pass 642-811 practice exam
Test4pass 642-811 preparation files
Test4pass 642-811 questions
Test4pass 642-811 answers
http://www.test4pass.com/642-811-exam.html The safer.easier way to get CCNP Certification
.
