640-811 Exam
Interconnecting Cisco Networking Devices
- Exam Number/Code : 640-811
- Exam Name : Interconnecting Cisco Networking Devices
- Questions and Answers : 120 Q&As
- Update Time: 2011-09-21
- Price:
$ 119.00$ 69.00
Free 640-811 Demo Download
Test4pass offers free demo for CCNA 640-811 exam (Interconnecting Cisco Networking Devices). You can check out the interface, question quality and usability of our practice exams before you decide to buy it. We are the only one site can offer demo for almost all products.
Exam Description
It is well known that 640-811 exam test is the hot exam of Cisco certification. Test4pass offer you all the Q&A of the 640-811 real test . It is the examination of the perfect combination and it will help you pass 640-811 exam at the first time!
Why choose Test4pass 640-811 braindumps
Quality and Value for the 640-811 Exam
100% Guarantee to Pass Your 640-811 Exam
Downloadable, Interactive 640-811 Testing engines
Verified Answers Researched by Industry Experts
Drag and Drop questions as experienced in the Actual Exams
Practice Test Questions accompanied by exhibits
Our Practice Test Questions are backed by our 100% MONEY BACK GUARANTEE.
Cisco CCNA 640-811 exam braindumps questions and answers
¡¡
Exam : CISCO 640-811
Title : ICND
1. Refer to the exhibit. Which two devices can be used to complete the connection between the WAN router at the customer site and the service provider? (Choose two.)
A. CSU/DSU
B. modem
C. WAN switch
D. ATM switch
E. Frame Relay switch
F. ISDN TA
Answer: AB
2. What are the general recommendations regarding the placement of access control lists? (Choose two.)
A. Standard ACLs should be placed as close as possible to the source of traffic to be denied.
B. Extended ACLs should be placed as close as possible to the source of traffic to be denied .
C. Standard ACLs should be placed as close as possible to the destination of traffic to be denied .
D. Extended ACLs should be placed as close as possible to the destination of traffic to be denied .
Answer: BC
3. Refer to the partial command output shown. Which two statements are correct regarding the router hardware? (Choose two.)
A. Total RAM size is 32 KB.
B. Total RAM size is 16384 KB (16 MB).
C. Total RAM size is 65536 KB (64 MB).
D. Flash size is 32 KB.
E. Flash size is 16384 KB (16 MB).
F. Flash size is 65536 KB (64 MB).
Answer: CE
4. Refer to the graphic. Which of the following commands would create the output shown at the bottom of the graphic?
A. Router# show ip eigrp topology
B. Router# show ip route
C. Router# show ip eigrp neighbors
D. Router# show ip ospf route
E. Router# show ip ospf database
Answer: A
5. Refer to the exhibit. A network technician is troubleshooting a connectivity problem on R2. The technician enters the show cdp neighbors command at the R2 console. If the network is composed only of Cisco devices, for which devices should entries be displayed?
A. R1
B. SW-B and R1
C. SW-B, R1, and SW-C
D. R3, SW-B, R1, and SW-C
E. SW-A, R3, SW-B, R1, and SW-C
F. Host A, SW-A, R3, SW-B, R1, and SW-C
Answer: B
6. If all OSPF routers in a single area are configured with the same priority value, what value does a router use for the OSPF router ID in the absence of a loopback interface?
A. the IP address of the first Fast Ethernet interface
B. the IP address of the console management interface
C. the highest IP address among its active interfaces
D. the lowest IP address among its active interfaces
E. the priority value until a loopback interface is configured
Answer: C
7. Which command is required for connectivity in a Frame Relay network if Inverse ARP is not operational?
A. frame-relay arp
B. frame-relay map
C. frame-relay interface-dlci
D. frame-relay lmi-type
Answer: B
8. Refer to the graphic. It has been decided that Workstation 1 should be denied access to Server1. Which of the following commands are required to prevent only Workstation 1 from accessing Server1 while allowing all other traffic to flow normally? (Choose two.)
A. RouterA(config)# interface fa0/0
RouterA(config-if)# ip access-group 101 out
B. RouterA(config)# interface fa0/0
RouterA(config-if)# ip access-group 101 in
C. RouterA(config)# access-list 101 deny ip host 172.16.161.150 host 172.16.162.163
RouterA(config)# access-list 101 permit ip any any
D. RouterA(config)# access-list 101 deny ip 172.16.161.150 0.0.0.255 172.16.162.163 0.0.0.0
RouterA(config)# access-list 101 permit ip any any
Answer: BC
9. Refer to the exhibit. R1 can ping across the serial link to 172.168.10.5, but cannot ping the FastEthernet interface of R2 (172.168.10.65). The routing protocol being used is EIGRP, and the routing table of R2 is shown. Which two statements could causes of this problem? (Choose two.)
A. The serial interface does not have the clockrate set.
B. EIGRP is not enabled on one of the routers.
C. The IP addressing scheme has overlapping subnetworks.
D. The IP addressing scheme is using subnet zero but the ip subnet-zero command has not been enabled on one or both of the routers.
E. The FastEthernet interface of R2 is administratively shutdown.
F. The EIGRP autonomous system numbers configured on the two routers do not match.
Answer: BF
10. Refer to the exhibit. What can be determined from the output shown?
A. The JaxSwitch1 switch is using VTP.
B. This is the only switch in the LAN topology.
C. The JaxSwitch1 switch is not the root switch.
D. The link to the root bridge is through a 1 Gbps connection.
E. Spanning Tree Protocol is disabled on the JaxSwitch1 switch.
Answer: C
11. Refer to the exhibit. Host A is to send data to Host B. How will Router1 handle the data frame received from Host A? (Choose three.)
A. Router1 will strip off the source MAC address and replace it with the MAC address on the forwarding FastEthernet interface.
B. Router1 will strip off the source IP address and replace it with the IP address on the forwarding FastEthernet interface.
C. Router1 will strip off the destination MAC address and replace it with the MAC address of Host B.
D. Router1 will strip off the destination IP address and replace it with the IP address of Host B.
E. Router1 will forward the data frame out interface FastEthernet0/1.
F. Router1 will forward the data frame out interface FastEthernet0/2.
Answer: ACF
12. Refer to the exhibit. What can be determined about the interfaces of the Main_Campus router from the output shown?
A. The LAN interfaces are configured on different subnets.
B. Interface FastEthernet 0/0 is configured as a trunk.
C. The Layer 2 protocol of interface Serial 0/1 is NOT operational.
D. The router is a modular router with five FastEthernet interfaces.
E. Interface FastEthernet 0/0 is administratively deactivated.
Answer: B
13. LAB
6. Which command is required for connectivity in a Frame Relay network if Inverse ARP is not operational?
A. frame-relay arp
B. frame-relay map
C. frame-relay interface-dlci
D. frame-relay lmi-type
Answer: B
14. Why has the network shown in the exhibit failed to converge?
A. The no auto-summary command needs to be applied to the routers.
B. The network numbers have not been properly configured on the routers.
C. The subnet masks for the network numbers have not been properly configured.
D. The autonomous system number has not been properly configured.
E. The bandwidth values have not been properly configured on the serial interfaces.
Answer: A
Click Online chat to talk with us , get more informations about Cisco CCNA 640-811 practice exam study guides questions and answers
Test4pass 640-811 Exam Features
Quality and Value for the 640-811 Exam
Test4pass Practice Exams for Cisco 640-811 are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.
100% Guarantee to Pass Your 640-811 Exam
If you prepare for the exam using our Test4pass testing engine, we guarantee your success in the first attempt. If you do not pass the CCNA 640-811 exam (ProCurve Secure WAN) on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.
Cisco 640-811 Downloadable, Printable Exams (in PDF format)
Our Exam 640-811 Preparation Material provides you everything you will need to take your 640-811 Exam. The 640-811 Exam details are researched and produced by Professional Certification Experts who are constantly using industry experience to produce precise, and logical. You may get questions from different web sites or books, but logic is the key. Our Product will help you not only pass in the first try, but also save your valuable time.
640-811 Downloadable, Interactive Testing engines
We are all well aware that a major problem in the IT industry is that there is a lack of quality study materials. Our Exam Preparation Material provides you everything you will need to take a certification examination. Like actual certification exams, our Practice Tests are in multiple-choice (MCQs) Our Cisco 640-811 Exam will provide you with free 640-811 dumps questions with verified answers that reflect the actual exam. These questions and answers provide you with the experience of taking the actual test. High quality and Value for the 640-811 Exam:100% Guarantee to Pass Your CCNA exam and get your CCNA Certification.
Test4pass 640-811 examTest4pass 640-811 pdf exam
Test4pass 640-811 braindumps
Test4pass 640-811 study guides
Test4pass 640-811 trainning materials
Test4pass 640-811 simulations
Test4pass 640-811 testing engine
Test4pass 640-811 vce
Test4pass 640-811 torrent
Test4pass 640-811 dumps
free download 640-811
Test4pass 640-811 practice exam
Test4pass 640-811 preparation files
Test4pass 640-811 questions
Test4pass 640-811 answers
http://www.test4pass.com/640-811-exam.html The safer.easier way to get CCNA Certification
.
